ID: 2618
Open
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
AMXmachine
Description
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off Switches with magnetic starters WEG
Saw harbor 5/8"
Dust exits 2 of 4" diameter, requres aprox. 850 CFM
Air use 72 CFM at 65 PSI based in 15 cycles/min
Table height 36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22” largo
Pneumatic pedal
Each cut takes 4 to 6 seconds
Shipping dimensions: 48” length x 40" width x 65” height - Weight: 590 lb. - Freight Class: 85
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXE
PARTE: 2GM-HS-0412-MD-3 - GUILLOTINA HIDRAULICA - DELUXEModelos Disponibles:HS-0412MD, 4’x12Ga. 3 HP, 220//440V, 3 PH, 24” manual back gaugeHS-0410MD, 4’x10Ga. 5 HP, 220440V, 3 PH, 24” manual back gaugeHS-0610MD, 6’x10Ga. 5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-0810MD, 8’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1010MD, 10’x10Ga. 7.5 HP, 220/440V, 3 PH, 24” manual back gaugeHS-1014MD, 10'x14Ga. 5 HP, 220V, 3 PH, 24" manual back gauge
AMXmachine
PART: 2CA-RM70-E - ROUND POLE MILLING MACHINE - CAPACITY 3/8” - 2-3/8” DIAMETER
PART: 2CA-RM70-E - ROUND POLE MILLING MACHINE - CAPACITY 3/8” - 2-3/8” DIAMETER
NEW WITH WARRANTYThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, ...
AMXmachine
DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
PART:
AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used
- Good conditionMade in USA
Two (2) saws fixed at 45° angle (saw heads are adjustable up
to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle
connected to 220V
3,900 blade RPM
Back fence
2 New On/Off
Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting
capacity with 10" blades:
2-1/2" width x 3-1/4" height
Machine capacity up to 12” dia...
AMXmachine
PART: 12548 - BALER - COMPACTOR - VERTICAL - 30” X 60” - CARDBOARD CARTON - 67” OPEN HEIGHT
PART: 12548 -
BALER - COMPACTOR - VERTICAL - 30” X 60” - CARDBOARD CARTON - 67” OPEN HEIGHT10 HP MOTOR
USED - GOOD CONDITIONS