ID: 2330
Open
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
AMXmachine
Description
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
SIDE ROLLER TABLES
Use with saws, planers, edgebanders, jointers, etc.
New with warranty
120 cm (47”) length x 39 cm (15.35”) width
Variable height 83 - 87 cm (32.5 - 34.25”)
Support large and heavy wood pieces and wood panels
Adjustable heigh to pair with your current machines
7 galvanized steel ball bearing rollers
- 1 back guide to avoid material to fall
- 1 block stop to make same size cuts when cutting stock material
Optional:
- Custom lengths
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PARTE: 2MA-FP-4075CB – LIJADORA - CALIBRADORA DE METAL – 40” ANCHO - 2 LIJAS
PARTE:
2MA-FP-4075CB – LIJADORA - CALIBRADORA DE METAL – 40” ANCHO - 2 LIJAS
NUEVA CON
GARANTIA
Standard
Features:
Abrasive
belt size: 40” x 75”
Motorized
Table Lift
Variable
Speed Conveyor, inverter drive
Conveyor
Forward & Reverse
Belt
Safety Overtravel Switches
Electronic
Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to Re-adjust
the tracking system when running extremely out of parallel belts
Heavy Duty
JackscrewTable Sup...
AMXmachine
GUILLOTINA DE PEDAL - 6 PIES PARA CAL. 18 - EN LAMINA NEGRA
PARTE: 1DO-G618 - GUILLOTINA DE PEDAL - 6
PIES PARA CAL. 18 - EN LAMINA NEGRA
NUEVA CON GARANTIALongitud de corte: 6´
(1.83m)Capacidad de corte: Cal.18
(Lamina negra)Placa de cortina: 5/8"Dimensiones de la máquina:
1960 x 840 x 1120mmPeso aproximado: 590 kgFabricada con materiales de
primera calidadHerramienta ideal para hacer
cortes en lámina de aceroConstruida en solida placa
de acero resistente de trabajo pesado
El cuerpo superior de la
guillotina ...
AMXmachine
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISON
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984
AMXmachine
TRISCADORA 10-60 MM AUTOMATICA
PART # 4VF-SV80ATV - TRISCADORA PARA SIERRA CINTAS 10 -60 MM - AUTOMATICANueva con garantiaAutomatic work cycle. Choice of type of setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. High-yield in very little workspace. Complete with base and with rod and roller to support saw blades.Bandsaw Thickness [min-max]: 0,5 – 1,2 mmBandsaw Width [min-max]: 10 – 60 mmSetting Pitch [min-max]: 5 – 35 mmSetting Speed [d...