Identificador: 2330
Abierta
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
AMXmachine
Descripción
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
SIDE ROLLER TABLES
Use with saws, planers, edgebanders, jointers, etc.
New with warranty
120 cm (47”) length x 39 cm (15.35”) width
Variable height 83 - 87 cm (32.5 - 34.25”)
Support large and heavy wood pieces and wood panels
Adjustable heigh to pair with your current machines
7 galvanized steel ball bearing rollers
- 1 back guide to avoid material to fall
- 1 block stop to make same size cuts when cutting stock material
Optional:
- Custom lengths
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
SECADORES
SECADORES CON AIRE REFRIGERADOModeloCapacidadDiámetro de Entrada del Tubo de Aire32IG-FN-7.5F1.0 m3/min1"32IG-FN-10F1.5 m3/min1"32IG-FN-15F2.0 m3/min1" 1/4"32IG-FN-20F2.5 m3/min1" 1/2"32IG-FN-30F3.6 m3/min1" 1/2"32IG-FN-50F6.5 m3/min2"32IG-FN-75F8.8 m3/min2" 1/2"32IG-FN-100F12.5 m3/min3"32IG-FN-150F20 m3/min3"32IG-FN-200F28 m3/min4"- El gas refrigerante puede ser cualquiera de los siguiente: R22,R407C, R134A
AMXmachine
SIERRA CINTA – AUTOMATICA – CAPACIDAD 16.5”
PARTE: 2AA-HA400W – SIERRA CINTA –
AUTOMATICA – CAPACIDAD 16.5” - AMADA
NUEVA
CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 1.18"-16.54"
Rectangle
(W x H) 16.3" x 16.3"
Work
Load Capacity 5,511 lbs.
Material
Index Stroke 19.6" (Maximum 9 times index)
Index
Length 0.394" - 177"
Saw
Blade Dimensions (L x T x W) 15' x 0.050" x 1-1/2"
Blade
Speed 56-295 ft./min, 60 Hz, Step less
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2...
AMXmachine
PART: 12536 - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED
PART:
12536 - OPTIMIZING CUTOFF SAW - OMGA T2030 NC ROLL-FEED
USED
Roll-Feed
Optimizing and Defecting Cut-Off Saw
Precise
and Safe Feeding via Eleven Solid Feed Rolls
Main
Saw Motor: 8.7 HP, 480v, 3ph
Pneumatic
Blade Cycle
237"
Infeed Marking Conveyor Station
19'
Outfeed Belt Conveyor with Four Pneumatic Sorting Kickers
10.5"
Kvara User-Interface w/ Push-Button Keyboard
Blade
Diameter: 500mm
Variable
Speed Feed up to 787 FPM
Sound/Safety
Hood
480v,
...
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...