Identificador: 2421
Abierta
Descripción
PART: 12088-E – PLANER 4 SIDES – 28” WIDE – MIDA
USED – VERY GOOD CONDITION
Maximum Height: 8”
Motors 220V, 3 phase
Conversion from KW to HP
Top...... 21KW = 28hp.
Bottom 11KW = 15hp.
Side ...6.4 KW = 8.7 hp.
Side ...6.4 KW = 8.7 hp.
Pago y Devoluciones
- Forma de pago
- Bank Transfer/Direct Debit
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachine
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MM
PARTE: 12110 - CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 150 LARGO MMUSADOS – COMPLETOS - EN BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
9,100.00 MXN
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PARTE: 2MA-FP-5285CB – LIJADORA - CALIBRADORA DE METAL – 52” ANCHO - 2 LIJAS
PARTE:
2MA-FP-5285CB – LIJADORA - CALIBRADORA DE METAL – 52” ANCHO - 2 LIJAS
NUEVA CON
GARANTIA
Standard
Features:
Abrasive
belt size: 52” x 86”
10”
diameter heavy duty drum for perfect graining
6-1/8”
wide opening for max. workpiece thickness 6”
Motorized
Table Lift with LED display
Variable
Speed Conveyor
Conveyor
Forward & Reverse
Belt
Safety Overtravel Switches
Electronic
Eye Belt Tracking. Belt tracking adjusting lever ( Belt T...