Identificador: 2421
Abierta
Descripción
PART: 12088-E – PLANER 4 SIDES – 28” WIDE – MIDA
USED – VERY GOOD CONDITION
Maximum Height: 8”
Motors 220V, 3 phase
Conversion from KW to HP
Top...... 21KW = 28hp.
Bottom 11KW = 15hp.
Side ...6.4 KW = 8.7 hp.
Side ...6.4 KW = 8.7 hp.
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachine
DUAL STAGE - ULTRA FINE GRINDING - HAMMER MILL - 100 & 75 HP
PART: 2SB-FGZ-240-40 - DUAL STAGE - ULTRA
FINE GRINDING - HAMMER MILL - 100 & 75 HP
New with warrantyThe compact and efficient Dual Stage Ultra Fine Grinding Wood
Hammer Mills are available in two configurations, both designed to produce the
finest finish grind from a variety of in-feed materials. The FG Series features two 13 Series Finish Grinding Wood
Hammer Mills stacked one above the other. Ideal for processing hogged wood
scrap, planer shavings, sawdust and dry wood chips, the FG S...
AMXmachine
PART: 12542 - GANG RIP SAW - 30 HP - GABBIANI
PART: 12542 - GANG RIP SAW - 30 HP - GABBIANIUSED - VERY GOOD CONDITION300 MM CAPACITY
CHAIN VERY GOOD CONDITION
AMXmachine
PART: 12572 - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN
PART: 12572-E - PRESS GLUING MACHINE - RADIO FRECUENCY -
SOLID WOOD - OGDEN
USED - GOOD CONDITION
Curing area: 36” x 60” x 2” thickClamping pressure is applied by multi-power - dual pistons on
a common shaft - pneumatic cylinders to maximize pressure while relying on
standard plant pressures. Unlike presses without multi-power cylinders, which
require booster compressors, the Model SL36x60 reaches full capacity at 100-psi
plant air pressure.Edge pressure is applied by eight push...