ID: 1091
Open
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
PART: 10395 - COPY LATHE - GENINI MINIAUTOMAT
USED - VERY GOOD OPERATIONAL CONDITIONS - SOLD AS-IS
AUTOMATIC FOR SMALL PIECES PRODUCTION
5 CUTTING FUNCTIONS
MAXIMUM WORKING CAPACITY: UP TO 10 CM DIAMETER & 15 CM LENGTH
AUTOMATIC FEEDER
HOLDERS FROM 10 MM TO 100 MM, 10 SETS OF HOLDERS APROX.
INCLUDED TOOLING WITH SIMILAR VALUE TO THE MACHINE ITSELF, FOR APPROXIMATE 50 DIFFERENT DESIGNS
AVERAGE OPERATIONAL SPEED 4 TO 5 PIECES PER MINUTE
MOTOR 7.5 HP, 220V, 3 PHASE
VIDEOS:
https://vimeo.com/428575546
https://vimeo.com/428575309
https://vimeo.com/428575056
https://vimeo.com/428574708
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachine
SOLDADORA DE SIERRA CINTAS - 20 – 60 mm
PARTE # 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachine
PARTE: 4VF-CSA - CIZALLA - GULLOTINA - SIERRA CINTAS - ANCHOS 150, 200, 310 MM
PARTE: 4VF-CSA - CIZALLA -
GULLOTINA - SIERRA CINTAS - ANCHOS 150, 200, 310 MM
Nueva con garantía
150 MM
200 MM
310 MM
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED
OPTIMIZING LINE
USED - VERY GOOD CONDITIONS
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS
THAN 1000 HOURS ON THIS MACHINEWorking dimensions:Cross sectionmin./max 0.48"- 10.23" width;
.25" - 3.15" thickness.Min. part length 5.5" cut.Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap;
servo controlled up to 825 FPM.Saw: Blad...