Identificador: 1091
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PART: 10395 - COPY LATHE - GENINI MINIAUTOMAT
USED - VERY GOOD OPERATIONAL CONDITIONS - SOLD AS-IS
AUTOMATIC FOR SMALL PIECES PRODUCTION
5 CUTTING FUNCTIONS
MAXIMUM WORKING CAPACITY: UP TO 10 CM DIAMETER & 15 CM LENGTH
AUTOMATIC FEEDER
HOLDERS FROM 10 MM TO 100 MM, 10 SETS OF HOLDERS APROX.
INCLUDED TOOLING WITH SIMILAR VALUE TO THE MACHINE ITSELF, FOR APPROXIMATE 50 DIFFERENT DESIGNS
AVERAGE OPERATIONAL SPEED 4 TO 5 PIECES PER MINUTE
MOTOR 7.5 HP, 220V, 3 PHASE
VIDEOS:
https://vimeo.com/428575546
https://vimeo.com/428575309
https://vimeo.com/428575056
https://vimeo.com/428574708
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED
OPTIMIZING LINE
USED - VERY GOOD CONDITIONS
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS
THAN 1000 HOURS ON THIS MACHINEWorking dimensions:Cross sectionmin./max 0.48"- 10.23" width;
.25" - 3.15" thickness.Min. part length 5.5" cut.Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap;
servo controlled up to 825 FPM.Saw: Blad...
AMXmachine
PARTE: 1SL-DC-BV25B - TORNO PARA METAL DE 240 X 400 MM
PARTE: 1SL-DC-BV25B - TORNO PARA METAL DE 240 X 400 MMNUEVO CON GARANTIAMOTOR 1 HP, 220V, 60 Hz, 2 FASESCAPACIDAD DE VOLTEO: 240 MMDISTANCIA ENTRE PUNTOS: 400 MMDIAMETRO DEL CHUCK: 125 MMVELOCIDADES: 6 VELS (115-1620 RPM)DIAMETRO HUSILLO: 25 MMPESO: 135 KGSTIPO DE EMPAQUE: 1 CAJA ACCESORIOS PARA EL TORNO - SE VENDEN POR SEPARADO:- CHUCK DE 4 MORDAZAS - DC-4JC- CONTRAPUNTO GIRATIRIO (CONO MT2) - DC-RC- LUNETA FIJA - DC-SR- LUNERA VIAJERA - DC-FR
-500x500.jpg)
AMXmachine
PARTE: 1AM-1280 – PALLET NOTCHER - 9” LENGTH – 40 KNIVE CUTTERHEAD - HEAVY DUTY
PARTE: 1AM-1280 – PALLET NOTCHER - 9” LENGTH – 40 KNIVE
CUTTERHEAD - HEAVY DUTY
New with warranty – 6-month warranty on manufacturing defects on mechanical
parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220VMaximum notcher size 9” length x 3” height x 3” depthCutterhead with 40 insert replaceable tip knives cutters for recycled
wood installedOn/Off Switch with magnetic starter
Products specifications are subject to change without notice
AMXmachine
PART: 12610 – STRAIGHT LINE RIP SAW – 1 SAW – NORTHTECH
PART: 12610 – STRAIGHT LINE RIP SAW – 1 SAW – NORTHTECHUsed – Good conditionMotor 15 HP, 460/60/3 electricsModel: SLR-12SCMfg. 2017