ID: 2591
Open
Listing ID: #2151 has been added to your wishlist.
Description
PART: 12589 – AUTOMATIC SPRYING MACHINE – MOULDINGS - RENZO BORGONOVO
USED – VERY GOOD CONDITION – REFURBISHED
MODEL: SP 6P
These machines have been designed for spray lineal parts i.e. Moldings, Flooring, Wood Strips, etc.
and can be used with water-based paints, thinners, nitro and polyurethane paints, paints containing pigments, acrylic paints, matt and gloss paints.
The machine features 4 spray stations comprising each of up to 2 automatic spray-guns, a tray collection and a duct for direct product recovery.
The machine is operated from a central control panel with PLC which automatically controls spray-gun opening and closing in relation to the length of the workpieces and feed speed, thereby ensuring large product savings. Operation and adjustments are independent for each spray-gun.
The workpieces are fed on solvent-resistant conveyor belts.
The conveyor belts are operated by a toothed belt driven by a mechanical gear-motor.
The suction system consists of a box, filters and electric fan.
The high performance of this system and use of a functional spray booth, located in the spraying areas, provide good protection against pollution for the operator and work area.
The product is fed to spray-guns by means of a diaphragm pump.
Other feed systems can also be adopted: under pressure, air-mix and air-less.
Technical features:
Standard production: min.- max.: 20 - 100 mt./min.
Installed power: kW 3,0
Working dimensions
Length: min.- max.: 800 mm. - infinite
Width: min.- max.: 15 – 150 mm.
Height: min.- max.: 15 - 100 mm.
Height of work table: 900 mm.
Compressed air consumpt.: NI/min 1500 – 2000
Spray gun and pump equipment proposed.
This material is optional, and other equipment
models or brands can be supplied upon
demand.
Not included. Machine only predisposed for pump and spray-guns installation.
Air delivery suction: 4000 m3/h
Aspiration rectangular fitting, internal and external measures
Internal: 250x355 mm.
External: 330x435 mm.
Overall machine dimensions and weight: 3000*2900*2220 mm. and 800 kg.
Voltage: TBD.
Machine in conformity with “EC” regulations.
Complete of User Manual (Ita/Eng) given in digital format.
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
PARTE: 3EA -TS300K - ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP
PARTE: 3EA -TS300K -
ESCOPLO - RECORRIDO 300 MM - MESA 560 MM - 5 HP
Nueva con garantíaFeaturesMax.keyway width per cut :16mmMax. stroke : 300mmNo. of stroke per minute: 8 steps(Low: 22,26, 31, 39spm ; High :44,52,61,78 spm)- Spindle motor : 5HP (4P/8P)- Working table : Dia. 560mm- Inner hole dia. of table : Dia. 75mmStandard Accessories1. Lubrication system2. Rotary table3. Tool box & tools4. Rubber chip cover (4pcs/set)5. Chip box Optional Accessories2. SK-9 Strong 3 Jaw scroll chuck 1PC...
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachine
SIERRA CINTA PARA METAL - CAP. 4.5"
PARTE: 1SL-DC-MBS412 - SIERRA CINTA HORIZONTAL Y VERTICAL PARA METAL - CAP 4.5" DIAMETROMOTOR: 3/4 HP, 110V, 60 HZ, 1 FASEVELOCIDAD: 3 ( 20,29,50 METROS POR MINUTO)MAXIMO DIAMETRO DE CORTE: 4-1/2"MAXIMO CORTE EN RECTANGULOS: 4" X 6"DIMENSIONES DE LA CINTA: 1/2" X .025 X 64-1/2"PESO: 63 KGSEMPAQUE: 1 CAJA