ID: 2661
Open
Description
PART: AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used - Good condition
Made in USA
Two (2) saws fixed at 45° angle (saw heads are adjustable up to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle connected to 220V
3,900 blade RPM
Back fence
2 New On/Off Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting capacity with 10" blades: 2-1/2" width x 3-1/4" height
Machine capacity up to 12” diameter saw blades can be installed
Table height 35-1/4"
1 Pneumatic pedal and 2 pistons to hold down the wood pieces in the table at the time of cutting
Each cut takes 4 to 6 seconds
Machine dimensions: 32” length x 48" width x 53” height - Weight: 560 lb.
Shipping dimensions: 48” length x 48" width x 58” height - Weight: 590 lb.
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12584 – BORING MACHINE - RITTER R246
PART: 12584 – BORING MACHINE - RITTER R246
USED – VERY GOOD CONDITION2 Bottom vertical drill heads, each with 23 gear driven
spindles on 32 mm centers 24 RH and 22 LH rotation, 2 - 3 HP motors, 3,450 RPM
spindle speed. Row & boring head spacing adjustable from 5" -
24" with mechanical digital readout, pneumatic cylinder drill head
advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth
control.Equipped with: 4 Overhead adjustable pneumatic holddowns on
each head, 72" long...
AMXmachine
PART: 2CK-MX340 – AUTOMATIC EDGEBANDER
PART: 2CK-MX340 – AUTOMATIC EDGEBANDERNEW WITH WARRANTYHigh-quality edge banding results for cabinet parts and case goods.The MX340 Automatic Edgebander is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. It comes equipped with high-frequency motors on both the end trim and top & bottom trim. In addition, it is equipped with PVC radius scraping and buffing units. Its compact design and affordable price point make it the ideal edge banding solu...
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PART: 12610 – STRAIGHT LINE RIP SAW – 1 SAW – NORTHTECH
PART: 12610 – STRAIGHT LINE RIP SAW – 1 SAW – NORTHTECHUsed – Good conditionMotor 15 HP, 460/60/3 electricsModel: SLR-12SCMfg. 2017