ID: 2618
Open
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
AMXmachine
Description
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off Switches with magnetic starters WEG
Saw harbor 5/8"
Dust exits 2 of 4" diameter, requres aprox. 850 CFM
Air use 72 CFM at 65 PSI based in 15 cycles/min
Table height 36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22” largo
Pneumatic pedal
Each cut takes 4 to 6 seconds
Shipping dimensions: 48” length x 40" width x 65” height - Weight: 590 lb. - Freight Class: 85
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachine
PART: 1AM-1150-4 – SET OF 4 KNIVE CUTTERS - HSS - FOR PALLET NOTCHER
PART: 1AM-1150-4 – SET OF 4 KNIVE CUTTERS - HSS - FOR PALLET NOTCHERNew4 Spare Straight HSS knivesNew design for Pallet Notcher model 1AM-1150Note:Please contact us before buying to confirm availability
AMXmachine
PARTE: 2MA- FP-2560 – LIJADORA 1 LIJA - CALIBRADORA DE METAL – 25” ANCHO - 1 LIJA
PARTE: 2MA- FP-2560 – LIJADORA 1 LIJA -
CALIBRADORA DE METAL – 25” ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:
Model
FP-2560 FP-4075 FP-5285Sanding
Capacity 24”
x 6-1/8” 40” x 6-1/8” 51” x 3-1/2”Abrasive
Belt ...
AMXmachine
PARTE: 2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
PARTE:
2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA
DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA
DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA
DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA
DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH
-500x500.jpg)
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.