ID: 2605
Open
Description
PART: 12609 – STRAIGHT LINE RIP SAW – 1 SAW – IMC - RP-12U
Used – Good condition
15 HP, 220/440/60/3 motor, (belt driven)
24" throat clearance
56-1/2" x 74" workspace
2 HP feed motor, (75-150 FPM) variable feed
Complete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers
62" x 80" x 60" overall dimensions
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachine
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
Spray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITIONPassline Height: 900 mmOperating side: RH, as viewed from inlet of line, LH
available as a special order.Workpiece Dimensions - Approx:Min. - max. length: 300 mm - 4880 mm = 12" - 16'Min. - max. width: 25 mm - 1300 mm = 1" - 51”Min. - max. thickness: 3 mm - 90 mm = 1/8" -
3-1/2"Max. weight: 3 kg per sq. ft
Speeds:Mechanical spe...
AMXmachine
LUMBER - CUT TO SIZE
LUMBER CUT TO SIZE15,000 - 17,000 foot - 5/8 X 3-1/4 X 64”
3,000 -
5,000 foot - 5/8 X 3-1/4 X 70”
Per truck load - every 2 weeksLUMBER FOR PALLETSGREEN OR AIR DRIED
AMXmachine
TORNO METAL
TORNO DE PRECISION PARA METAL 4-1/8" SPINDLE BORE & FREE TAPER ATTACHMENTGT-2040 - 20"x40", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2060 - 20"x60", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2080 - 20"x80", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2680 - 26"x80", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-26120 - 26"x120", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-3280 - 32"x80", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-32120 - 32"x120", 4-1/8" bore, 12 spd, 15 HP, 220/440V