Identificador: 2609
Abierta
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALL
AMXmachine
Descripción
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALL
Used - Good condition
HIGH POINT
MODELO: HP-11
MFG. 2004
Single saw head configuration
Motor powered set works for accurate saw wheel elevation.
Digital position controller permits accurate saw wheel height positioning.
Automatic blade tension is controlled by hydraulic cylinder.
Variable feed speed by hydraulic motor drive.
The big pressure roller is air cylinder loaded to hold wood down firmly.
1. Saves Time and labor costs
2. Pneumatic pressure roller infeed
3. Digital position controller permits accurate saw wheel height
4. Easy to operate and set up
Feed speed: 4-27m/min (13-90FPM)
Max. cutting height: 250mm (10”)
Max. cutting width: 300mm (11 3/4”)
Min. workpiece length: 400mm; 205mm with extension set
Max. workpiece length: 580mm
Distance from blade to conveyor: 4-125mm
Saw wheel Diameter: 711.5mm (28”)
Saw wheel width: 22.7mm (1”)
Saw blade size: 4265 x 27mm (168” x 1’)
Blade speed: 2816m/min (9240FPM)
Saw Motor: 15kW(20HP)
Feed unit: 0.75kW(2HP) gearbox motor with frequency converter
Cooling system Oil mist
Blade tensioning
Hydraulic system
Motor for blade positioning: 0.18kW(1/4HP)
Dust post: Ø4” x 4
Table height: 902.5mm
Machine weight: 951kgs
Machine dimensions: 2835 x 2052 x 1678mm (LxWxH)
Pago y Devoluciones
- Forma de pago
- Bank Transfer/Direct Debit
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 12529 - VENEER GUILLOTINE - 2 KNIFE - 3200 MM - MONGUZZI
PART:
12529 - VENEER GUILLOTINE - 2 KNIFE - 3200 MM - MONGUZZI
USED - VERY GOOD CONDITIONS
Model TRM-2L 3200
Capacity 3200 MM
Hydraulic
Mfg. 1995
Sharpened knives
New mats
AMXmachine
PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE - CAPACITY 1” - 5” DIAMETER
PART: 2CA-RM150-E - ROUND POLE MILLING MACHINE -
CAPACITY 1” - 5” DIAMETER
NEW WITH WARRANTYThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acry...
AMXmachine
PART: 1AM-1150-G – PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD - HEAVY DUTY - GASOLINE MOTOR
PART: 1AM-1150-G – PALLET NOTCHER – 9” LENGTH – 4 KNIVE CUTTERHEAD - HEAVY DUTY - GASOLINE MOTORNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyGasoline motor 13 HPMaximum notcher size 9” long x 2-1/2” height x 1-5/8” depth400 to 800 notcher/hr. approximateCutterhead with HSS knives installed - New designVideo: https://vimeo.com/805816822 - Electric MotorVideo: https://vimeo.com/805816822 - Gasoline MotorOptional: Honda Gasoline MotorPle...
AMXmachine
PART: 12505 - VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT
PART: 12505-E - VERTICAL PANEL SAW - HOLZHER
1265 SUPER CUT
USED - GOOD CONDITIONModel: 1265SYear of Manufacture: 2008Condition: Very GoodElectric: 230 Voltage 60 Cycle 3 PhaseHolz Her Vertical Panel SawSpecifications:Main motor 4 HPDepth of cut 2” maxScoring unit with insert knivesSaw head rotates 90 degrees for rip or cross
cuttingManual shifting back gridGauging bar with flip stop for midway fence with scaleBottom roller with manual control for easy movement of
panelsIntegrated dust...