ID: 2609
Open
Listing ID: #2609 has been added to your wishlist.
Description
PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALL
Used - Good condition
HIGH POINT
MODELO: HP-11
MFG. 2004
Single saw head configuration
Motor powered set works for accurate saw wheel elevation.
Digital position controller permits accurate saw wheel height positioning.
Automatic blade tension is controlled by hydraulic cylinder.
Variable feed speed by hydraulic motor drive.
The big pressure roller is air cylinder loaded to hold wood down firmly.
1. Saves Time and labor costs
2. Pneumatic pressure roller infeed
3. Digital position controller permits accurate saw wheel height
4. Easy to operate and set up
Feed speed: 4-27m/min (13-90FPM)
Max. cutting height: 250mm (10”)
Max. cutting width: 300mm (11 3/4”)
Min. workpiece length: 400mm; 205mm with extension set
Max. workpiece length: 580mm
Distance from blade to conveyor: 4-125mm
Saw wheel Diameter: 711.5mm (28”)
Saw wheel width: 22.7mm (1”)
Saw blade size: 4265 x 27mm (168” x 1’)
Blade speed: 2816m/min (9240FPM)
Saw Motor: 15kW(20HP)
Feed unit: 0.75kW(2HP) gearbox motor with frequency converter
Cooling system Oil mist
Blade tensioning
Hydraulic system
Motor for blade positioning: 0.18kW(1/4HP)
Dust post: Ø4” x 4
Table height: 902.5mm
Machine weight: 951kgs
Machine dimensions: 2835 x 2052 x 1678mm (LxWxH)
Payments & Returns
- Payment Methods
- Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachine
PART: 4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM
PART:
4BA-DPM-ED-2141-E – VERTICAL PANEL SAW - CAP. 2100 MM X 4100 MM X 60 MM - BALA
New with warrantyDemo
model with about 30 hours on it
Specifications
-
Comes with digital readouts on the vertical and horizontal axis, readout in
decimal inches or mm
-
Processing sheets both horizontally and vertically
-
Cutting height is 2100mm
-
Cutting length is 4100mm (161") Actual overall length of machine is 16’.4”
-
Weight 2400 lbs
-
Thickness of cut is 0-60mm
...
AMXmachine
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISON
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984
-500x500.jpg)
AMXmachine
SOLDADORA DE SIERRA CINTAS - 20 – 60 mm
PARTE # 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachine
PART: 12616 – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY – GASOLINE MOTOR
PART: 12616 – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY – GASOLINE MOTORUsed – Like new – 50 – 100 hour useBrand: AMX MachineryModel: 1AM-1180-EGGasoline motor 13 HPMaximum notcher size 9” length x 3” height x 3” depth400 to 800 notcher/hr. approximateCutterhead with insert replaceable tip knives cutters for new and recycled wood installedVideo: https://vimeo.com/1011462445