ID: 2273
Open
Listing ID: #2273 has been added to your wishlist.
Description
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE
USED - VERY GOOD CONDITIONS
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE
Working dimensions:
Cross section
min./max 0.48"- 10.23" width; .25" - 3.15" thickness.
Min. part length 5.5" cut.
Length min/max 15.75"- 16'0".
Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.
Saw: Blade dia. 20": auto waste gate for waste: Length measurement by flourscent camera.
Software: OptiCom Pro controller with 15" screen: Optimization of (3) grades.
Infeed/Outfeed: 16' Infeed with (2) marking stations; 33' outfeed with 5 kickers for length sort.
Note: Machine has been dismantled and packaged by Dimter tech.
Seller indicates less than 1000 hours on the machine.
Machine available to ship immediately!
Weight: 8000 lbs
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PERFILADORA AFILADORA DE CUCHILLAS WEINIG
PARTE # 12WG-R-960 - PERFILADORA / AFILADORA DE CUCHILLASPerfiladora/afiladora de cuchillas de alta precisión para:El afilado y la fabricación de cuchillas perfiladas a partir de una cuchilla en bruto, de acuerdo con una plantilla.El reafilado de cuchillas rectas de cepillado en el cabezal portacuchillas.El afilado de cuchillas rectas de cepillado en el cabezal porta-cuchillas es posible, sobresaliendo las mismas en su medida normal.Diámetro de la muela mín./máx. 150 mm / 225 mmAncho de la ...
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
PART: 12528-E - VERTICAL PANEL SAW - ELCON D215
PART: 12528-E - VERTICAL PANEL SAW - ELCON D215USED - GOOD CONDITION
MFG. 2013
AMXmachine
PARTE: 2GM-PSR - ROLADORA ELECTRICA - 50" ANCHO
PARTE:
2GM-PSR - ROLADORA ELECTRICA - 50" ANCHOPARTE: 2GM-PSR-5016 – ROLADORA - 50” x 16GA - 1 HP, 220/440V, 3 PHPARTE: 2GM-PSR-5016-1PH – ROLADORA - 50” x 16GA - 1.5 HP, 220V, 1 PHPARTE: 2GM-PSR-5014 – ROLADORA - 50” x 14GA - 1.5 HP, 220/440V, 3 PHFeatures:- ISO 9001 certified- Heavy welded all steel construction for maximum rigidity- Silence electrical motor- Quick release top roller- Two Powered driven Rolls- Precision ground rollers- 1” roll opening- All three rolls are made o...