ID: 2273 Open

PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE

PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE

AMXmachine

Contact Seller

Description

PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE

USED - VERY GOOD CONDITIONS

Year of Manufacture: 2018

Condition: Excellent

Electric: 460 Voltage 60 Cycle 3 Phase

GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE

Working dimensions:

Cross section

min./max 0.48"- 10.23" width; .25" - 3.15" thickness.

Min. part length 5.5" cut.

Length min/max 15.75"- 16'0".

Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.

Saw: Blade dia. 20": auto waste gate for waste: Length measurement by flourscent camera.

Software: OptiCom Pro controller with 15" screen: Optimization of (3) grades.

Infeed/Outfeed: 16' Infeed with (2) marking stations; 33' outfeed with 5 kickers for length sort.

Note: Machine has been dismantled and packaged by Dimter tech.

Seller indicates less than 1000 hours on the machine.

Machine available to ship immediately!

Weight: 8000 lbs

Payments & Returns

Payment Methods: Bank Wire Transfer

Post Message

AMXmachine

PART: 12575-E – BAND MAGNETIC SEPARATOR

PART: 12575-E – BAND MAGNETIC SEPARATOR Unused, “New” Conditions Motor: 3 HP, 230/460V/3/60 Marca: Wolverine 29-1/2” wide x 70” long Belt Motor: WEG 3HP Approximate Weight/unit (kgs): 776 Aproximate Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572 Speed - It is fixed speed and can be changed with a controller. Magnet power is strong - the original design was to pull small scrap metal from sand on conveyor belt.

AMXmachine

PART: 2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOB

PART: 2BC-5TOB-E - TRIM CUTTER - PAPER TO FINE METAL FOIL - BLOAPCO - MODEL 5TOBNew with warrantyPaper, corrugated and heavy fiber boardBEST USES - Removal of continuous film, Edge Trim and MatrixINDUSTRIES - Converting, Paper, Film, Plastic, Non-woven, FoilsIDEAL FORpaperlight fiber boardcorrugated boardsolid bleached sulfate paperboardplastic filmfoil laminatespressure-sensitive stocklight, non-ferrous foilsCAPABILITIESMaterials: Paper, corrugated and heavy fiber boardTrim Width max: 8 1/2" (...

AMXmachine

PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALL

PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALLUsed - Good conditionHIGH POINTMODELO: HP-11MFG. 2004Single saw head configurationMotor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1. Saves Time and labor c...