Identificador: 433
Abierta
Descripción
PARTE: 2MA-PL-20E - DOBLADORA DE METAL - ENGANCHADORA
Standard Features:
ISO 9001 certified
HP Heavy Duty AC main motor, 110V
Heavy welded all steel construction for maximum rigidity
Standard Pittsburgh Attachment
Standard Round Power Flange Attachment & Right Angle, Double Seam Roll
and Drive Cleat Roll , all in one, no installation is required
ACME side can be operated at same time
Heavy Duty caster wheels for easy moving
One year warranty for parts
Standard Equipment:
Standard Pittsburgh Attachment # PA-20E, installed
Power Flange Attachment # FA-20E & right angle rolls # RAR-20E, installed
Drive Cleat Roll # DCR-20E, installed
Double Seam Roll # DSR-20E, installed
Capacity: 20 Ga. to 26Ga.
Depth of pocket: 5/16”
Feeding speed: 32 FPM
Main motor: 1.5 HP, 110V
Weight: 458 LBS
Dimensiones: 36” largo x 23” ancho x 43” alto
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
TORNO METAL
TORNO DE PRECISION PARA METAL 4-1/8" SPINDLE BORE & FREE TAPER ATTACHMENTGT-2040 - 20"x40", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2060 - 20"x60", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2080 - 20"x80", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2680 - 26"x80", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-26120 - 26"x120", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-3280 - 32"x80", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-32120 - 32"x120", 4-1/8" bore, 12 spd, 15 HP, 220/440V
AMXmachine
PARTE: 2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
PARTE:
2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA
DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA
DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA
DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA
DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH
AMXmachine
PARTE: 2GM-PSR - ROLADORA ELECTRICA - 50" ANCHO
PARTE:
2GM-PSR - ROLADORA ELECTRICA - 50" ANCHOPARTE: 2GM-PSR-5016 – ROLADORA - 50” x 16GA - 1 HP, 220/440V, 3 PHPARTE: 2GM-PSR-5016-1PH – ROLADORA - 50” x 16GA - 1.5 HP, 220V, 1 PHPARTE: 2GM-PSR-5014 – ROLADORA - 50” x 14GA - 1.5 HP, 220/440V, 3 PHFeatures:- ISO 9001 certified- Heavy welded all steel construction for maximum rigidity- Silence electrical motor- Quick release top roller- Two Powered driven Rolls- Precision ground rollers- 1” roll opening- All three rolls are made o...