ID: 2310
Open
PART: 2QM-R-RCGS-E - ROLLER COATER GLUE SPREADERS - 1, 2 SIDES - 24", 48", 63" WIDE
AMXmachine
Description
ROLLER COATER GLUE SPREADERS
PART: 2QM-R-.RCGS-1-24-1.75-E - GLUE SPREADER - 1 SIDE - 24” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-24-1.75-E - GLUE SPREADER - 2 SIDES - 24” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-48-1.75-E - GLUE SPREADER - 1 SIDE - 48” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-48-1.75-E - GLUE SPREADER - 2 SIDES - 48” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-63-1.75-E - GLUE SPREADER - 1 SIDE - 63” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-63-1.75-E - GLUE SPREADER - 2 SIDES - 63” WIDE - 1.75” OPEN
New with warranty
Photos & Features
Options:
Roll Guards (Hoods) for Operator Safety
Variable Speed Control (40-118 fpm)
6" Opening
Features:
• 1-sided Roller Coater (applies glue to 1 side [top side] of each panel) or 2- sided Roller Coater for 2-sided machine
• Working thickness: adjustable from 0 to 45mm (0 to 1.77"), adjustable via hand wheel
• Maximum material width: 630mm (24") or 1220mm (48”) wide or 1600mm (63”)
• Application rolls quantity: 1 or 2
• Application rolls material: SBR rubber, 60 durometer (Shore A)
• Application rolls diameter: 205mm (8") or 210mm (8.27”) for 48”, or 210mm (8.27”) for 63” wide
• Application rolls grooving: 20 grooves per inch
• Doctor rolls quantity: 1 or 2
• Doctor rolls material: Chrome-plated steel for 24” or NBR rubber, 98 durometer (Shore A) for 48” and 63” wide
• Doctor rolls diameter: 148mm (5.8") or 175mm (6.9”) for 48” and 63” wide
• Doctor rolls grooving: none (smooth rolls)
• Drive motor power: 1.5kw (2hp)
• Feed rate: fixed at 64fpm (optional: adjustable from 40 to 118 fpm)
• Includes emergency stop bars at front and back of machine
• Includes stainless steel waste glue drip pan
Note:
Electrical Requirements: 220v or 440v, 3-phase, 15 amps
The machine is designed to use water based PVA glue
For best glue for his application, your customer should consult his glue supplier (Franklin International, Wilsonart, etc.).
For countertops, we believe Wilsonart 3000 is quite popular
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachine
AFILADORA DE CUCHILLAS PARA MOLDURADORA
PARTE: 2TA-TG-9330 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA
NUEVA CON GARANTIAFEATURES:
Economical model for small shop.
Work table back to front, left to right is moved on linear
bearing cross roller rail sets, accuracy and durability.
Grinding wheel head is micro adjustable and accurate. 2 HP
variable speed control motor for powerful grinding.
Easy setup template holder for accurate copy tracer.
Knife-edge angle is adjusted by dovetails are grooved;
grindin...
AMXmachine
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISON
PART: 12611 – STRAIGHT LINE RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984
AMXmachine
AFILADORA DE CUCHILLAS
PARTE: 2GB-JC-312 - AFILADORA DE CUCHILLAS PARA MOLDURADORANew with WarrantyWe offer the Jeffer JC-312-GT profile grinder for 1:1 profi le grinding on all your moulding and planing knives. Designed much like the German profile grinders that utilize a template, with additional features at a much more competitive price. We sell this model loaded with all the extra features for no extra charge.The larger capacity is able to sharpen heads up to 12” long x 12” diameter.Standard features inclu...