Identificador: 2310
Abierta
PART: 2QM-R-RCGS-E - ROLLER COATER GLUE SPREADERS - 1, 2 SIDES - 24", 48", 63" WIDE
AMXmachine
Descripción
ROLLER COATER GLUE SPREADERS
PART: 2QM-R-.RCGS-1-24-1.75-E - GLUE SPREADER - 1 SIDE - 24” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-24-1.75-E - GLUE SPREADER - 2 SIDES - 24” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-48-1.75-E - GLUE SPREADER - 1 SIDE - 48” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-48-1.75-E - GLUE SPREADER - 2 SIDES - 48” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-63-1.75-E - GLUE SPREADER - 1 SIDE - 63” WIDE - 1.75” OPEN
PART: 2QM-R-RCGS-1-63-1.75-E - GLUE SPREADER - 2 SIDES - 63” WIDE - 1.75” OPEN
New with warranty
Photos & Features
Options:
Roll Guards (Hoods) for Operator Safety
Variable Speed Control (40-118 fpm)
6" Opening
Features:
• 1-sided Roller Coater (applies glue to 1 side [top side] of each panel) or 2- sided Roller Coater for 2-sided machine
• Working thickness: adjustable from 0 to 45mm (0 to 1.77"), adjustable via hand wheel
• Maximum material width: 630mm (24") or 1220mm (48”) wide or 1600mm (63”)
• Application rolls quantity: 1 or 2
• Application rolls material: SBR rubber, 60 durometer (Shore A)
• Application rolls diameter: 205mm (8") or 210mm (8.27”) for 48”, or 210mm (8.27”) for 63” wide
• Application rolls grooving: 20 grooves per inch
• Doctor rolls quantity: 1 or 2
• Doctor rolls material: Chrome-plated steel for 24” or NBR rubber, 98 durometer (Shore A) for 48” and 63” wide
• Doctor rolls diameter: 148mm (5.8") or 175mm (6.9”) for 48” and 63” wide
• Doctor rolls grooving: none (smooth rolls)
• Drive motor power: 1.5kw (2hp)
• Feed rate: fixed at 64fpm (optional: adjustable from 40 to 118 fpm)
• Includes emergency stop bars at front and back of machine
• Includes stainless steel waste glue drip pan
Note:
Electrical Requirements: 220v or 440v, 3-phase, 15 amps
The machine is designed to use water based PVA glue
For best glue for his application, your customer should consult his glue supplier (Franklin International, Wilsonart, etc.).
For countertops, we believe Wilsonart 3000 is quite popular
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.jpg)
AMXmachine
SIERRA CINTA PARA METAL - CAP. 7"
PARTE: 1SL-DC-MBS7 – SIERRA CINTA HORIZONTAL Y VERTICAL PARA METAL - CAP. 7" DIAMETRONUEVA CON GARANTIAMOTOR: 1 HP, 110V, 60 HZ, 1 FASEVELOCIDAD: 41,49, 69 METROS POR MINUTOMAXIMO DIAMETRO EN TUBOS: 7"MAXIMO DIAMETRO EN RECTANGULOS: 7" X 12"DIMENSIONES DE LA CINTA: 3/4" X .032 X 93"PESO: 185 KGSEMPAQUE: 1 CAJAMEDIDAS YA INSTALADA: 2.0 MTS LARGO X 1.2 MTS ANCHO X 1.6 MTS ALTOINCLUYE BOMBA PARA REFRIGERANTE
AMXmachine
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIET
PART: 12172 – COPY LATHE - LOCATELLI BIG ARRIETUSED – GOOD CONDITIONSFully operationallyOver $9,000 in steady rests and tooling
Max. capacity 4" dia. x 6" lengthSequence as follows:roughing knifesteady resttraveling roughing knifesecond roughing pattern knifefinishing pattern knifeparting knifeAlso ....if neededend boring bit or formed bitsecond end boring bit or formed knife with side sliding
movementLocatelli Dimensions: 10’ 6” Long x 6’ wide
x 6’ tall
...
AMXmachine
PART: 12530 - VENEER GUILLOTINE - 2 KNIFE - 4000 MM - EMME ELLE
PART: 12530 - VENEER GUILLOTINE
- 2 KNIFE - 4000 MM - EMME ELLE
USED - VERY GOOD CONDITIONS
Model: T.O.2.4000
Capacity 4000 mm
Hydraulic
Frontal Control Panel EC9001
Mfg. 2002
CE Norm