ID: 2276
Open
Description
PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINE
Features:
Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.
Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.
The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.
Cutter head can be adjusted at x or y direction.
Carving angle can be adjusted at 30 to 120 degrees.
Custom order for 2, 4, 6, 8 or 12 spindles machine or special size.
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12527 - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435A
PART: 12527-E - AUTOMATIC EDGEBANDER - BIESSE AKRON 1435AUSED - VERY GOOD CONDITION
Year: 2018CAPABILITIES- One-sided edgebander with glue pot- CNC control and command system with TS10 digital
controller, large touch screen LCD graphic display, WINDOWS CE operating
system, USB port- Chain drive and upper presser
- Group of pressure rollersWork stations :- Premilling- Gluing unit with pellet pot
- Adjustable pneumatic pressure unit- End cutting unit ...
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
PARTE: 2GM-PSR - ROLADORA ELECTRICA - 50" ANCHO
PARTE:
2GM-PSR - ROLADORA ELECTRICA - 50" ANCHOPARTE: 2GM-PSR-5016 – ROLADORA - 50” x 16GA - 1 HP, 220/440V, 3 PHPARTE: 2GM-PSR-5016-1PH – ROLADORA - 50” x 16GA - 1.5 HP, 220V, 1 PHPARTE: 2GM-PSR-5014 – ROLADORA - 50” x 14GA - 1.5 HP, 220/440V, 3 PHFeatures:- ISO 9001 certified- Heavy welded all steel construction for maximum rigidity- Silence electrical motor- Quick release top roller- Two Powered driven Rolls- Precision ground rollers- 1” roll opening- All three rolls are made o...
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...