ID: 2276
Open
Description
PART: 2CA-CM-8CAR-E - MANUAL COPY CARVING MACHINE
Features:
Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.
Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.
The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.
Cutter head can be adjusted at x or y direction.
Carving angle can be adjusted at 30 to 120 degrees.
Custom order for 2, 4, 6, 8 or 12 spindles machine or special size.
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
DUAL STAGE - ULTRA FINE GRINDING - HAMMER MILL - 100 & 75 HP
PART: 2SB-FGZ-240-40 - DUAL STAGE - ULTRA
FINE GRINDING - HAMMER MILL - 100 & 75 HP
New with warrantyThe compact and efficient Dual Stage Ultra Fine Grinding Wood
Hammer Mills are available in two configurations, both designed to produce the
finest finish grind from a variety of in-feed materials. The FG Series features two 13 Series Finish Grinding Wood
Hammer Mills stacked one above the other. Ideal for processing hogged wood
scrap, planer shavings, sawdust and dry wood chips, the FG S...
-500x500.jpg)
AMXmachine
SIERRA CINTA PARA METAL - CAP. 4.5"
PARTE: 1SL-DC-MBS412 - SIERRA CINTA HORIZONTAL Y VERTICAL PARA METAL - CAP 4.5" DIAMETROMOTOR: 3/4 HP, 110V, 60 HZ, 1 FASEVELOCIDAD: 3 ( 20,29,50 METROS POR MINUTO)MAXIMO DIAMETRO DE CORTE: 4-1/2"MAXIMO CORTE EN RECTANGULOS: 4" X 6"DIMENSIONES DE LA CINTA: 1/2" X .025 X 64-1/2"PESO: 63 KGSEMPAQUE: 1 CAJA
AMXmachine
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12599 - FISHER+RUCKLE FZX-28 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZX-28 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 2800 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 2001400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...