ID: 2673
Open
.PNG)
Description
PARTE: 2RI-R250EA - FRAME MASTER COMBINATION FACE FRAME AND DOOR CLAMPING EASELTechnical Data and Specifications:
Description:
Frame assembly system for doweled, mortise and tenon, or screwed together frames and cabinet doors. Screwed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No glue required.
Standard Features:
- 6'x12' Assembly Table
- 45° Vertical Easel
- Hold Down Beam with (5) Adjustable Hold Down Cylinders
- 1-5/16" Clearance Under Vertical Cylinders
- 1-5/16" Clearance Under Vertical Cylinders
- Squaring Bars on Left, Right and Bottom Sides
- (10) Universal Clamping Cylinders & Manifold
- 706.8 LBS of force at 100 PSI
- 706.8 LBS of force at 100 PSI
- (4) Material Hold Down Dogs
- (3) Adjustable Material Positioning Stops
- 2" Cylinder Position Grid Pattern
- 3" Bore Clamp Cylinder Housing
- Heavy Duty Steel Frame
- Perforated Steel Table
- Open Back Design
- 6 port Manifold with 1/4" NPT Regulator/Gage
- Adjustable pressure from 20 to 130 PSI
- Foot Treadle
- (1) Coilhose for Pneumatic Screw Gun
- Screw Gun Not Included
Technical Data and Specifications:
- Usable Table Area: 72" x 138"
- Work Height: 25"
- Footprint: 165" L x 66" D x 86" H
- Electrical: N/A
- Air: 100 PSI
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
Horizontal Bore & Dowel Insertion Machine
PARTE: 2PI-H49 - Horizontal Bore & Dowel Insertion MachineIs a horizontal point to point bore and dowel insertion machining center.It is designed to CNC position the spindle, bore a hole, then CNC position the inserter, inject glue or water (for pre-glued dowels), and fire the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and point to points by shifting boring and doweling
-500x500.png)
AMXmachine1
DOOR CLAMPING TABLE
PARTE: 2RI-R450V - DOOR CLAMPING TABLEIs designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square asse...
-500x500.png)
AMXmachine1
46 Spindle Double Row System Drill
PARTE: 2RI-R46 - 46 Spindle Double Row System DrillDescription:Iis ideal for cabinet and closet system panels requiring more than two rows of system holes for hardware functions. Drills two rows of shelf pin holes simultaneously. The fixed position top drilling heads provide rigid panel control for precise hardware system hole location. Single point panel referencing fence accurately locates all hardware system holes from the fence with the use of fence mounted stops and indexing pins. Linear...
AMXmachine1
PART: 2BE-BEL – ENCLOSURELESS DUST COLLECTORS
PART: 2BE-BEL – ENCLOSURELESS DUST COLLECTORSNew with warrantyPowerful,
low-noise, stand-alone dust system for indoor wood dust collectionThe series
Enclosureless Dust Collectors, the ultimate choice for dust collection. Ranging
from 5 HP to 20 HP, it offers high efficiency and a full range of features. Designed in compliance with NFPA.
Optimized for maximum performance, it includes dust disposal options that are
engineered to minimize downtime. Ideal for wood dust, the series limits
ai...