ID: 2673
Open
Listing ID: #2673 has been added to your wishlist.
.PNG)
Description
PARTE: 2RI-R250EA - FRAME MASTER COMBINATION FACE FRAME AND DOOR CLAMPING EASELTechnical Data and Specifications:
Description:
Frame assembly system for doweled, mortise and tenon, or screwed together frames and cabinet doors. Screwed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No glue required.
Standard Features:
- 6'x12' Assembly Table
- 45° Vertical Easel
- Hold Down Beam with (5) Adjustable Hold Down Cylinders
- 1-5/16" Clearance Under Vertical Cylinders
- 1-5/16" Clearance Under Vertical Cylinders
- Squaring Bars on Left, Right and Bottom Sides
- (10) Universal Clamping Cylinders & Manifold
- 706.8 LBS of force at 100 PSI
- 706.8 LBS of force at 100 PSI
- (4) Material Hold Down Dogs
- (3) Adjustable Material Positioning Stops
- 2" Cylinder Position Grid Pattern
- 3" Bore Clamp Cylinder Housing
- Heavy Duty Steel Frame
- Perforated Steel Table
- Open Back Design
- 6 port Manifold with 1/4" NPT Regulator/Gage
- Adjustable pressure from 20 to 130 PSI
- Foot Treadle
- (1) Coilhose for Pneumatic Screw Gun
- Screw Gun Not Included
Technical Data and Specifications:
- Usable Table Area: 72" x 138"
- Work Height: 25"
- Footprint: 165" L x 66" D x 86" H
- Electrical: N/A
- Air: 100 PSI
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
SANDER 37" - WIDE BELT - 1 BAND
PARTE: 2SS-WBS3760101 - SANDER 37" - WIDE BELT - 1 BANDOur American Made Wide Belt Sander will improve your finishing time, decrease your hand sanding and increase your productivity. Available with either a 10 horsepower, single phase or a 15 horsepower, three phase motor these American made wide belt sanders are workhorses that will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt15 Hp, 3 Phase (3~) 208 Volt / 230 Volt460 Volt, 3 Phase (3~), 15 HpWide Belt Sanders solve ...
AMXmachine1
PARTE: 3AM-G-35/42S - SIERRA CINTA PARA METAL SEMI AUTOMATICA
PARTE: 3AM-G-35/42S - SIERRA CINTA PARA METAL SEMI AUTOMATICASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMax. Cutting Capacity(mm): Round:300mm, sqaur...
AMXmachine1
PART: 12531 - BAND SAWMILL - BAKER 3674D
PART: 12531 - BAND SAWMILL - BAKER 3674D
USED - VERY GOOD CONDITIONModel: 3674DMfg. 2022551 hours - 09/18/23Currently used 2-3 days a weekOne ownerPortable
Log deck
AMXmachine1
PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
PART:
2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
NEW
WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The t...