ID: 2596
Open
Description
PART: 12592 - SHREDDER - BALEMASTER - MODEL 1440 - 30 HP – 63”
USED - GOOD CONDITION
Motor Leeson 30 HP, 3/60/208-230/460 Volt, 1785 RPM
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
OPEN BACK - FACE FRAME ASSEMBLY TABLE
PARTE: 2RI-R210E/A - OPEN BACK - FACE FRAME ASSEMBLY TABLEScrewed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location. No ...
AMXmachine1
36" X 72" TABLA DE CORRIENTE DESCENDENTE
36" X 72" TABLA DE CORRIENTE DESCENDENTE - 2CK- 3672DTIs ergonomic and energy efficient and offer easy operator maintenance. The table is mounted on wheels and can be easily moved around your shop. This downdraft table is perfect for light to medium duty woodworking applications such as sanding and finishing.The most innovative and efficient downdraft dust collection tables on the marketInnovative filter design acts as dust trays to capture 100% of collected dust particlesFilters can be easi...
AMXmachine1
CORTADORA DE METAL ESTILO GANG
CORTADORA DE METAL ESTILO GANG PARTE: 2GM-PS-4816GT48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phasewith NC programmable cut to length, 5” touch screenISO 9001 certifiedAmerican design and Taiwan quality machineSlit and cut to length in one unitNC programmable cutting length, 100 job memory featureSingle cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.Auto cycle mode-shearing will auto cycle the programmed cut lengt...
AMXmachine1
Profile Sander
PARTE: 2PI-220 - LIJADORA DE CANTOSfeatures two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.designed for flexible brushes2 upper and lower sanding headstable moves up and down, allowing the user to sand certa...