ID: 2422
Open
AUTOMATIC HANGER INSERTER MACHINE - CRAFT INC - COBRA AHM-01 PICTURE FRAME MANUFACTURING
AMXmachine
Description
PART: AMX-10055 - AUTOMATIC HANGER MACHINE - CRAFT INC - COBRA AHM-01 - PICTURE FRAME MANUFACTURING
USED – GOOD CONDITION
Brand: Craft Inc. from South Attleboro Massachusetts
Model: COBRA AHM-01
Serial: 079
127V, CE
36 reels included with approximate 6000 hangers each reel
Machine dimensions: 72” length x 26” wide x 62” height
Shipping dimensions:
Machine: 32” width x 79” length x 66” height - wood pallet
Reels: 28” width x 30” depth x 60” height - wood pallet
Palletized for shipping, Will load into truck
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PART: 12584 – BORING MACHINE - RITTER R246
PART: 12584 – BORING MACHINE - RITTER R246
USED – VERY GOOD CONDITION2 Bottom vertical drill heads, each with 23 gear driven
spindles on 32 mm centers 24 RH and 22 LH rotation, 2 - 3 HP motors, 3,450 RPM
spindle speed. Row & boring head spacing adjustable from 5" -
24" with mechanical digital readout, pneumatic cylinder drill head
advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth
control.Equipped with: 4 Overhead adjustable pneumatic holddowns on
each head, 72" long...
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
PART: 12525-E - CNC MACHINING CENTER - ROVER A 1332 ATS
PART: 12525-E - CNC MACHINING CENTER - ROVER A 1332 ATSYear: 2012Specifications:Working Field:
X - Axis: 3280mm = 129.1"
Y - Axis: 1320mm = 52"
Z - Axis: 170mm = 7"
6 = ATS Panel Support Rails
Biesse's ATS - auto locating pods
Panel Lift Supports for Loading & Unloading
of Sheets
Multi Zone Working Areas
Front, Rear & Side Stops
17.7 HP HSD Electrospindle - HSKF63
12 Position Rotary Tool Changer
BH 17L Boring Head w/ quick change system
10 - Vert. Spindles - ...