PART: AMX-10008 - DRILL AND SAW - FOR BED RAIL ENDS USED – GOOD CONDITIONS

PART: AMX-10175 - PACK SEALER SHRINK TUNNEL - PREFERRED PACK MODEL: PP1518EC Used - Good condition Variable speed: 0 - 60 FPM Machine dimensions: 26” width x 76” length x 50” height

PART: AMX-10042 – CHAMBER HEAT TUNNEL - HOT AIR OVEN - WELDTRON – 6028 USED – GOOD CONDITIONS MADE IN THE USA MODEL # 6028 VOLTS: 230 CYCLE: 60 PHASE: 3 AMPS: 44 FWO: 31627 WATTS: 15 MANUFACTURER: WELDTRON CORPORATION, NEW JERSEY, USA TUNNEL APERTURE: 7-1/2" HIGH X 22"WIDE MACHINERY DIMENSIONS: 76" LONG X 34" WIDE X 63" TALL - WEIGHT 662 LB MACHINE WILL BE WOOD PALLETIZED FOR SHIPPING

PART: AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45 Used - Good conditionMade in USA Two (2) saws fixed at 45° angle (saw heads are adjustable up to 3°) (2) motors, 1.5 HP, 208-230/460V, 3 phase, currentle connected to 220V 3,900 blade RPM Back fence 2 New On/Off Switches with magnetic starters 2 Saw blades installed 10” diameter, Cutting capacity with 10" blades:  2-1/2" width x 3-1/4" height Machine capacity up to 12” dia...

PART: AMX-10174 - FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP MEMORY PROGRAMMABLE USED - FAIR CONDITION MADE IN ITALY TABLE SIZE: 11.75” ANCHO X 22” ALTO TABLE HEIGHT: 37” MATERIAL THICKNESS: 0.197" MINIMO A 3.15" MAXIMO MATERIAL WIDTH: 0.39" MINIMO A 3.94" MAXIMO ELECTRONIC, PNEUMATIC ENERGY: 110V, 1 FASE, 60 HZ ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE DIGITAL SCREEN MACHINE DIMENSIONS: 31” WIDTH X 24” LEN...

PART: AMX-10173 - FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP MEMORY PROGRAMMABLE USED - FAIR CONDITION MADE IN ITALY     TABLE SIZE: 11.75” ANCHO X 22” ALTO TABLE HEIGHT: 37” MATERIAL THICKNESS: 0.197" MINIMO A 3.15" MAXIMO MATERIAL WIDTH: 0.39" MINIMO A 3.94" MAXIMO ELECTRONIC, PNEUMATIC ENERGY: 110V, 1 FASE, 60 HZ ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE DIGITAL SCREEN MACHINE DIMENSIONS: 31” WIDTH X 2...

PART: AMX-10172 - FRAME ASSEMBLY MACHINE - ALFA MACCHINE - MITRE-MITE VN4 + MP MEMORY PROGRAMMABLE USED - GOOD CONDITION LITTLE USE MADE IN ITALY TABLE SIZE: 13.75” ANCHO X 26.5” ALTO TABLE HEIGHT: 37” MATERIAL THICKNESS: 0.197" MINIMO A 3.15" MAXIMO MATERIAL WIDTH: 0.39" MINIMO A 3.94" MAXIMO ELECTRONIC, PNEUMATIC ENERGY: 110V, 1 FASE, 60 HZ ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE DIGITAL SCREEN MACHINE DIMENSIONS: 31” W...

PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14 Used - Very good condition 2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM 2 New On/Off Switches with magnetic starters WEG Saw harbor 5/8" Dust exits 2 of 4" diameter, requres aprox. 850 CFM Air use 72 CFM at 65 PSI based in 15 cycles/min Table height 36-1/8" (917 mm) Guide Left: 37” largo Gude Right: 22” largo Pneumatic pedal Each cut takes 4 to 6 seconds Shippi...

PART: 12309 - ALPINE AUGSBURG MILL - 150 HPUSED - GOOD CONDITIONSNO MOTORS INCLUDED, ONLY THE MILLSVideo1: https://vimeo.com/774524950Video2: https://vimeo.com/774526264

PART: 12308- ALPINE AUGSBURG MILL - 100 HPUSED - GOOD CONDITIONSNO MOTORS INCLUDED, ONLY THE MILLSVideo1: https://vimeo.com/774527761

PART: 12616 – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY – GASOLINE MOTORUsed – very good condition – 50 – 100 hour useBrand: AMX MachineryModel: 1AM-1180-EGGasoline motor 13 HPMaximum notcher size 9” length x 3” height x 3” depth400 to 800 notcher/hr. approximateCutterhead with insert replaceable tip knives cutters for new and recycled wood installedVideo: https://vimeo.com/1011462445

PART: 12615 - HORIZONTAL BAND RESAW – 1 BAND - 16” WIDE X 12” TALLUsed – Excellent condition - Currently just under 50 hours of useWoodmizer HR130Manufacturer specs:15 HP electric power 230 V, 3 phasePowered blade height adjustment8° tilting bed0 - 85 ft/min variable feed16" wide  x 12" high cant capacityCurrently just under 50 hours of use

PART: 12614 - HORIZONTAL BAND RESAW – 1 BAND - 12” WIDE X 12” TALLUsed - Good conditionBAKERBBR-0 / ABXFeatures the frame and headrig of our "BX" model, but use an "AX" model conveyor belt. This means that the head-rig can be adjusted up or down and the conveyor stays at a fixed height.Because the conveyor belt stays at a fixed height, it is easier to interchange and integrate with other material handling systems in your facility. This versatile band resaw is perfect for those who need a s...

PART: 12613 - HORIZONTAL BAND RESAW – 1 BAND - 11-3/4” WIDE X 10” TALLUsed - Good conditionHIGH POINTMODELO: HP-11MFG. 2004Single saw head configurationMotor powered set works for accurate saw wheel elevation. Digital position controller permits accurate saw wheel height positioning. Automatic blade tension is controlled by hydraulic cylinder.Variable feed speed by hydraulic motor drive.The big pressure roller is air cylinder loaded to hold wood down firmly.1.    Saves Time and labor c...

PART: 12612 – SHREDDER – WOOD – 30 HP – HORIZONTAL – CREESSWOODUSED – GOOD CONDITIONSModel: EF-12-30SRSTCutterhead Motor: 30 HP, 230/460v, 3phFeed Motor: 0.75 HP, 230/460v, 3phVibrating Infeed Conveyor: 12" x 120"Variable Speed ControlAmp Meter for Cutterhead MotorYear: 20163/4” Screen, Currently

PART: 12611 – STRAIGHT LINE  RIP SAW – 1 SAW – MATTISONUsed – Good conditionModelo: 404Main Motor: 15 HPTable Size: 65" x 77"Throat Size: 24-1/4"Feed Motor: 2 HPFour-Speed Feed: 62, 93, 124, & 186 FPMInfeed Rip Fence w/ Two StopMaximum Stock Thickness: 4"Largest Diameter Blade: 14"Manual Arbor Raise/Lower Via Manual Hand-CrankSpindle Speed: 3,600 RPMCurrent Voltage: 440v, 3phMfg. 1984

PART: 12610 – STRAIGHT LINE  RIP SAW – 1 SAW – NORTHTECHUsed – Good conditionMotor 15 HP, 460/60/3 electricsModel: SLR-12SCMfg. 2017

PART: 12609 – STRAIGHT LINE  RIP SAW – 1 SAW – IMC - RP-12UUsed – Good condition15 HP, 220/440/60/3 motor, (belt driven)24" throat clearance56-1/2" x 74" workspace2 HP feed motor, (75-150 FPM) variable feedComplete with automatic chain lubication, magnetic controls and (1) set of anti kickbacks fingers62" x 80" x 60" overall dimensions

PART: 12608 – STRAIGHT LINE  RIP SAW – 1 SAW - NORTHTECH SRS-12Used – Good conditionManufacturer’s Specification15 HP Motor + 1 HP feed motor (with Wye Delta soft start)Mechanical variable speed (45′ – 100′ FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”.Bottom & top kickback fingersRack and pinion fence for precise and quick positioningDigital electronic oiler provides maximum chain and race life15-1/2″ distance from column to blade8...

PART: 12607 – STRAIGHT LINE  RIP SAW – 1 SAW - POWERMATICUsed – Good conditionManufacturer Specifications - Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge- 12" main blade is supported by heat-treated arbor for rigidity and support- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy- Variable feed speeds accommodate different types of stock- Auto-...