ID: 2709
Open
Listing ID: #2709 has been added to your wishlist.
Description
PART: 2EX- XS-3P52 - WIDE BELT SANDER - 52” WIDE - 3 HEADS
52" 30 / 30 / 25 HP Performa Series Wide-Belt Sander
Designed in the USA especially for the American market. All of our sanders are built using the highest quality components and construction methods such as mono-block construction, electrical controls, and Camozzi pneumatics. So, it does not matter whether it’s our best selling “Excess Series” or our massive industrial “Super Series,” you can rest assured that your sander will be there for the long haul.
75″ Belt Length
Over thickness safety device
Infeed bed rollers
Digital thickness controller
Individual amp meters
Disc brakes on sanding heads
Telemecaique electrics
Camozzi pneumatics
Variable speed drive system
Specifications:
75″ Belt Length
Over thickness safety device
Infeed bed rollers
Digital thickness controller
Individual amp meters
Disc brakes on sanding heads
Telemecaique electrics
Camozzi pneumatics
Variable speed drive system
Specifications:
Horsepower: 30/30/25 HP
Voltage: 230V or 460V Optional
Phase(s): 3PH
Belt Size: 52" x 75"
CFM Requirement: 6500
Main Motors: 30 / 30 / 25 HP
Feed Motor: 3 HP
Elevation Motor: .5 HP
Contact Drum Size: 8" / 8" / 5"
Conveyor Speed (ft/min): 15 - 50
Max Thickness: 6"
Min Thickness: 1/8"
Width: 52"
Head Count: 3
Amps (220V / 460V): 233A / 117A
Weight: 8100
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL POLE MILLING MACHINE - HAWKER
PART: 1HA-0001 - SET OF 4 BLADES - FOR DOWEL
POLE MILLING MACHINE - HAWKERNEW BLADESFOR HAWKER DOWEL POLE MILLING MACHINESMODELS: HAWKER 500, HAWKER 1500, HAWKER 2000,
ETC.BLADE DIMENSIONS: 4" LENGHT X 2-3/16" WIDTH X 1/4"
THICKNESS - (100 MM LENGHT X 55 MM WIDTH X 6 MM THICKNES)
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
PARTE: 2GM-PSR - ROLADORA ELECTRICA - 50" ANCHO
PARTE:
2GM-PSR - ROLADORA ELECTRICA - 50" ANCHOPARTE: 2GM-PSR-5016 – ROLADORA - 50” x 16GA - 1 HP, 220/440V, 3 PHPARTE: 2GM-PSR-5016-1PH – ROLADORA - 50” x 16GA - 1.5 HP, 220V, 1 PHPARTE: 2GM-PSR-5014 – ROLADORA - 50” x 14GA - 1.5 HP, 220/440V, 3 PHFeatures:- ISO 9001 certified- Heavy welded all steel construction for maximum rigidity- Silence electrical motor- Quick release top roller- Two Powered driven Rolls- Precision ground rollers- 1” roll opening- All three rolls are made o...
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...