Identificador: 2513
Abierta
Descripción
PART: 2NT-DC15SS – DUST COLLECTOR - 15 HP – 5000 CFM
NEW WITH WARRANTY
Blower HP: 15HP Direct Drive
Shaker HP: 1/2HP
3 phase, 460V
26-3/8" 8-Blade Impeller
Machine CFM Rating: 5000
Inlet Dust Port Size: 16" Round
Outlet Dust Port Size: 12"x15"
Filters: Seventy-Two 5"x60 Clothe Bags
Bottom Bags: 22"x48"
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.jpg)
AMXmachine
PART: 2CK-MX370P – AUTOMATIC EDGEBANDER
PART:
2CK-MX370P – AUTOMATIC EDGEBANDERFrom cabinet parts to cabinet doors, this Edgebander can do it all.The Cantek MX370P Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.F...
AMXmachine
DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
PART:
AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used
- Good conditionMade in USA
Two (2) 10” blades installedSaws fixed at 45° angle (saw heads are adjustable up
to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currently connected to 220V
3,900 blade RPM
Back fence
2 New On/Off
Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting
capacity with 10" blades:
2-1/2" width x 3-1/4" height
Machine cap...
AMXmachine
PARTE: 1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASE
PARTE:
1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASENUEVO CON GARANTIAMOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 360 - 3060 RPMCHUCK: 1.5 A 13 MM (5/8")DISTANCIA DEL CHUCK A COLUMNA: 150 MMCARRERA CHUCK: 65 MMDISTANCIA DEL CHUCK A LA MESA: 355 MMDISTANCIA DEL CHUCK A LA BASE: 495 MMDIMENSIONES DE LA MESA: CIRCULAR DE 255 MMDIMENSIONES TOTALES: 920 MM X 255 MM X 540 MMPESO: 38 KGSEMPAQUE: 1 CAJA
AMXmachine
PARTE: 2MA-FP-2560CB – LIJADORA - CALIBRADORA DE METAL – 25” ANCHO - 2 LIJAS
PARTE:
2MA-FP-2560CB – LIJADORA - CALIBRADORA DE METAL – 25” ANCHO - 2 LIJAS
NUEVA CON GARANTIA
Standard
Features:
Motorized
Table Lift, with digital readout
Variable
Speed Conveyor
Conveyor
Forward & Reverse
Belt
Safety Overtravel Switches
Electronic
Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to
Re-adjust
the tracking system when running extremely out of parallel belts
Heavy Duty
Table Support
Double
Infeed & Outfeed Pinch...