ID: 2513
Open
Description
PART: 2NT-DC15SS – DUST COLLECTOR - 15 HP – 5000 CFM
NEW WITH WARRANTY
Blower HP: 15HP Direct Drive
Shaker HP: 1/2HP
3 phase, 460V
26-3/8" 8-Blade Impeller
Machine CFM Rating: 5000
Inlet Dust Port Size: 16" Round
Outlet Dust Port Size: 12"x15"
Filters: Seventy-Two 5"x60 Clothe Bags
Bottom Bags: 22"x48"
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PERFILADORA AFILADORA DE CUCHILLAS WEINIG
PARTE # 12WG-R-960 - PERFILADORA / AFILADORA DE CUCHILLASPerfiladora/afiladora de cuchillas de alta precisión para:El afilado y la fabricación de cuchillas perfiladas a partir de una cuchilla en bruto, de acuerdo con una plantilla.El reafilado de cuchillas rectas de cepillado en el cabezal portacuchillas.El afilado de cuchillas rectas de cepillado en el cabezal porta-cuchillas es posible, sobresaliendo las mismas en su medida normal.Diámetro de la muela mín./máx. 150 mm / 225 mmAncho de la ...
AMXmachine
PART: 12505 - VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT
PART: 12505-E - VERTICAL PANEL SAW - HOLZHER
1265 SUPER CUT
USED - GOOD CONDITIONModel: 1265SYear of Manufacture: 2008Condition: Very GoodElectric: 230 Voltage 60 Cycle 3 PhaseHolz Her Vertical Panel SawSpecifications:Main motor 4 HPDepth of cut 2” maxScoring unit with insert knivesSaw head rotates 90 degrees for rip or cross
cuttingManual shifting back gridGauging bar with flip stop for midway fence with scaleBottom roller with manual control for easy movement of
panelsIntegrated dust...
AMXmachine
2AA-H550EII – SIERRA CINTA – CAPACIDAD 21.6”
PARTE: 2AA-H550EII – SIERRA CINTA –
CAPACIDAD 21.6” – AMADA
NUEVA CON GARANTIA
Machine
Specifications
Cutting
Capacity Round (Diameter) 7.87"-18.90"
Rectangle
(W x H) 21.65" x 18.90"
Work
Load Capacity 4,409 lbs.
Saw
Blade Dimensions (L x T x W) 16' x 0.050" x 1.5"
Blade
Speed Inverter Blade Speed Control
Saw
Blade Motor 7.5 HP
Hydraulic
Pump Motor 2 HP
Cutting
Fluid Pump Motor 1/2 HP
Voltage
Required*
AC220V±10%,
3 PH, 60 Hz
*All
Oth...
AMXmachine
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETER
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETERSelf-feeding and easily changeable cutters.Makes dowels from 6 MIM - 18 MIM (1/4" to ¾”)Dowels stock cut with spiral grooves for gluing.The DM-77 mills wooden dowels from square sticks.Powered by heavy-duty 1 HP motor and produces dowels at the rate of 23 to 27 feet per minute.Specially designed knives make sharpening easy.SPECIFICATIONS:
Diameter
Range: 1/4" ~ 3/4"Motor:
1 HP, 1 PH, 115VWorking
Speed: 24 ~ 28 FPMMinimum
Working Mate...