ID: 2608
Open
Description
PART: 12612 – SHREDDER – WOOD – 30 HP – HORIZONTAL – CREESSWOOD
USED – GOOD CONDITIONS
Model: EF-12-30SRST
Cutterhead Motor: 30 HP, 230/460v, 3ph
Feed Motor: 0.75 HP, 230/460v, 3ph
Vibrating Infeed Conveyor: 12" x 120"
Variable Speed Control
Amp Meter for Cutterhead Motor
Year: 2016
3/4” Screen, Currently
Payments & Returns
- Payment Methods
- Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12575-E – BAND MAGNETIC SEPARATOR
PART:
12575-E – BAND MAGNETIC SEPARATOR
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachine
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
PART:
12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000New - Never used2022 model, never usedVertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel
AMXmachine
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINE
PART: 12598 - FISHER+RUCKLE FZL-34 DELTA – VENEER CROSSFEED SPLICING MACHINEUSED – GOOD CONDITIONFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead ti...
AMXmachine
PART: 10395 - COPY LATHE - GENINI MINIAUTOMAT
PART: 10395 - COPY LATHE - GENINI MINIAUTOMATUSED - VERY GOOD OPERATIONAL CONDITIONS - SOLD AS-ISAUTOMATIC FOR SMALL PIECES PRODUCTION5 CUTTING FUNCTIONSMAXIMUM WORKING CAPACITY: UP TO 10 CM DIAMETER & 15 CM LENGTHAUTOMATIC FEEDERHOLDERS FROM 10 MM TO 100 MM, 10 SETS OF HOLDERS APROX.INCLUDED TOOLING WITH SIMILAR VALUE TO THE MACHINE ITSELF, FOR APPROXIMATE 50 DIFFERENT DESIGNSAVERAGE OPERATIONAL SPEED 4 TO 5 PIECES PER MINUTEMOTOR 7.5 HP, 220V, 3 PHASEVIDEOS:https://vimeo.com/428575546https:/...