ID: 2590
Open
Description
PART: 12588 – RECIPROCANTING - SPRAY LINE UV - GIARDINA
USED - GOOD CONDITION
CAPACITY: 12 SPRAY GUNS, 2 CIRCUITS
HOT AIR TUNNEL, CAN USE HOT WATER FOR HEATING
INFRARED TUNNEL
UV ED TUNNEL FOR EDGE DRYING
IR AND UV OVENS ARE NEW, JUST 1 HR USE SINCE INSTALLATION
CURRENTLY INSTALLED AND WORKING
VIDEO: https://vimeo.com/1048779881
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachine
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDO
PARTE: 2GM-HS-0410M - GUILLOTINA HIDRAULICA - USO RUDOHS-0410M, 4’x10Ga., 24” manual back gauge & 60" squering arm, 7.5 hp, 220V, 3 PhHS-0410E, 4’x10Ga., 24” SIKO power back gauge & 60" squering arm, 7.5 hp, 220V, 3HS-0425M, 4’x1/4”, with 24” manual back gauge & 60" squering arm, 10 HP, 220V, 3HS-0425E, 4’x1/4” with 24” SIKO power back gauge & 60" squering arm, 10 HP, 220V, 3 HS-0625M, 6’x1/4”, 10 HP, 220V, 3 PH, with 24" manual back gaugeHS-0625E, 6’x1/4”, 10 HP,...
AMXmachine
PARTE: 2MA-FP-4075 - LIJADORA - CALIBRADORA DE METAL - 40" ANCHO - 1 LIJA
PARTE: 2MA-FP-4075 - LIJADORA - CALIBRADORA DE METAL - 40" ANCHO - 1 LIJANUEVA CON GARANTIASpecifications:
Model
FP-2560 FP-4075 FP-5285Sanding
Capacity 24”
x 6-1/8” 40” x 6-1/8” 51” x 3-1/2”Abrasive...
AMXmachine
PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONS
PARTE: 1SL-DC-PB16 - DOBRADORA DE TUBO HIDRAULICA DE 16 TONSNueva con garantiaPara tubo de ½”, 3/4”, 1”,1-1/4”, 1-1/2”, 2”, 2-1/2", 3". Angúlo máximo 30°