ID: 2415
Open
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000
AMXmachine
Description
PART: 12229 – DOWEL MILLING MACHINE – ½” – 2” DIAMETER CAPACITY – HAWKER 2000
USED – GOOD CONDITION
MINIMUM LENGHT 16”
VARIABLE SPEED 75 - 250 LINEAL FEET/MIN
MAIN MOTOR 15 HP, 3,600 - 5,000 RPM
FEED MOTOR 5 HP
MACHINE DIMENSIONS 42” W X 48” L X 46” H
MACHINE DIMENSIONS WITH HOPPER: 42” W X 88” L X 46” H
WEIGHT: 3,000 LBS
SEVERAL ROLLERS INFEED & OUTFEED
SEVERAL DIAMETER CUTTERHEADS
SEVERAL KNIVE SETS & SETTERS
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Bank Transfer/Direct Debit
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PART: 12614 - HORIZONTAL BAND RESAW – 1 BAND - 12” WIDE X 12” TALL
PART: 12614 - HORIZONTAL BAND RESAW – 1 BAND - 12” WIDE X 12” TALLUsed - Good conditionBAKERBBR-0 / ABXFeatures the frame and headrig of our "BX" model, but use an "AX" model conveyor belt. This means that the head-rig can be adjusted up or down and the conveyor stays at a fixed height.Because the conveyor belt stays at a fixed height, it is easier to interchange and integrate with other material handling systems in your facility. This versatile band resaw is perfect for those who need a s...
AMXmachine
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
PART: 12545 - SPRAY LINE UV - SUPERFICI MINI PLUS
Spray Line, Dryer, Pumps and Guns and Infeed Table complete
USED - VERY GOOD CONDITIONPassline Height: 900 mmOperating side: RH, as viewed from inlet of line, LH
available as a special order.Workpiece Dimensions - Approx:Min. - max. length: 300 mm - 4880 mm = 12" - 16'Min. - max. width: 25 mm - 1300 mm = 1" - 51”Min. - max. thickness: 3 mm - 90 mm = 1/8" -
3-1/2"Max. weight: 3 kg per sq. ft
Speeds:Mechanical spe...
AMXmachine
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"
PART: 2CA-RM30100AT-E - MULTI ROUND POLE – 1-1/8" x 4"New with Warranty This RM30100AT is capable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use flat board without per-cutting.• Variable s...