ID: 2731
Open
Description
PART: 12706 - PANEL CLAMP - 12 FEET - JAMES L TAYLOR
Used - Good condition
12 FEET LONG
30 clamps
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000
PART:
12564 - CASE CLAMP - 55" L x 96" H x 24" D - UHLING - HP3000New - Never used2022 model, never usedVertical designPneumatic operationClamping Capacity 55" L x 96" H x
24" DClamping operation is accomplished through four
dual pod pressure bars which are activated and can be individually selected for
quick accurate clamping up to 120 PSIStroke length 3-1/2"Roller bearing mounted carriage with pneumatic
locks
Carriage
mounted operators panel
AMXmachine
DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
PART:
AMX-10079 - DOUBLE MITER SAW - 45 DEGREES - 12” DIAMETER CAPACITY - CTD D45
Used
- Good conditionMade in USA
Two (2) 10” blades installedSaws fixed at 45° angle (saw heads are adjustable up
to 3°)
(2) motors, 1.5 HP, 208-230/460V, 3 phase, currently connected to 220V
3,900 blade RPM
Back fence
2 New On/Off
Switches with magnetic starters
2 Saw blades installed 10” diameter,
Cutting
capacity with 10" blades:
2-1/2" width x 3-1/4" height
Machine cap...
AMXmachine
CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60 LARGO MM
PARTE: 12108 – CABEZAL PARA MOLDURADORA – 40 FLECHA X 122 DIAMETRO X 60 LARGO MMUSADOS – COMPLETOS - EN BUENAS CONDICIONES20° ANGULO DE CORTEMARCA: - Los precios son en pesos e incluyen IVA.- Enviamos su factura.- Flete incluido a las principales ciudades de México.- Pregunte por Existencia, Cobertura de Flete a su Ciudad y Tiempos de Entrega antes comprar.
5,100.00
AMXmachine
PART: 12088-E – PLANER 4 SIDES – 28” WIDE – MIDA
PART: 12088-E – PLANER 4 SIDES – 28” WIDE – MIDAUSED – VERY GOOD CONDITIONMaximum Height: 8”Motors 220V, 3 phaseConversion from KW to HPTop...... 21KW = 28hp.Bottom 11KW = 15hp.Side ...6.4 KW = 8.7 hp.Side ...6.4 KW = 8.7 hp.