ID: 2730
Open
Listing ID: #2730 has been added to your wishlist.
Description
PARTE: 3CH-FCB - Spiral Cutterhead For Spindle Shaper
Straight bore that can be fits in general spindle shapers.
Choice of steel or aluminum body.
Choice of TCT knife bit size 14*14*2.0mm and 50*12*1.5mm.
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
COMBINATION FACE FRAME AND DOOR CLAMPING EASEL
PARTE: 2RI-R475EA - COMBINATION FACE FRAME AND DOOR CLAMPING EASELDescription:Frame assembly system for doweled, mortise and tenon, or screwed together frames and cabinet doors. Screwed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ...
-500x500.png)
AMXmachine1
DUSTCOLLECTOR - 1 HP
PARTE: 2MK-CP/1.C - DUSTCOLLECTOR - 1 HPIs Ideal for collecting light powder from small machines, it has an adapter that can be attached to the end of the hose making it easier whenever cleaning the floor. Technical InformationMotor Specs1 HP 1 PHASE 127 V – 16 AAir Flow Capacity600 CFMBag volume60 L (2.12 ft³)Number of Inlet1Inlet Size4"Filtration1 micronBag size14" x 25" | 371mm x 635mmWeight73 Lbs
-500x500.png)
AMXmachine1
DUST COLLECTOR - 3 HP
PARTE: 2MK-CPD/3.C - DUST COLLECTOR - 3 HPWas developed for cabinet shops with high production. With air flow rate of 2,760 ft³/min, the CPD/3 collects dust of up to 3 machines simultaneously.Technical InformationMotor Spec3 HP 1 phase 220 V 15 AAir Flow Capacity2,760 CFMFan Diameter12" | 305mmBag Capacity15 ft3 | 0.43 m3Number of air Inlet3Inlet sizeMain: 6" | 150mm - Spliter: 4"/100mmFiltration1 micronSound Rating89 dBWeight128 Lbs | 58 kg
AMXmachine1
Hydraulic Back Corrugated Cutterhead
PARTE: 3CH-HFBB - Hydraulic Back Corrugated Cutterhead Bore that can be fits in general 4-side high speed moulders/planers.Standard specifications with single angle 12 or 20 degrees.