ID: 2703
Open
Listing ID: #2703 has been added to your wishlist.
.PNG)
Description
PARTE: 2PI-MMTX - 6-Axis Miter, Mortise, Tenon Machine Center
Is a dual carriage, 6 axis CNC controlled Miter Mortise and Tenon Machining Center – tailored specifically to meet high-volume
production requirements.
- Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.
- Climb cut of both tenon and mortise cuts for a tear out free cut.
- The ability to cut MDF paper or vinyl wrapped profiles.
- Eliminates the need for applying inlays.
- Reduces the maintenance and cost associated with the tooling by more than 50% by eliminating end coping.
- Eliminates the need for outside profiling or sanding the edges of doors
- Eliminates the need for sanding the face of the doorsBoth stiles and rails are run face down for consistency of machining.
- Self aligning joints
- There is a more durable and aesthetically pleasing blind joint (no visible joint on edge of board)
- Multiple tool paths to choose from in tenon and miter (on the mortise side) to accommodate all profiles.
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
PART: 2CK-HR400PB - HORIZONTAL BAND RESAW - 1 BAND - WITH RETURN CONVEYOR - 30 HP – 15-3/4” WIDE
PART: 2CK-HR400PB - HORIZONTAL BAND RESAW - 1
BAND - WITH RETURN CONVEYOR - 30 HP – 15-3/4” WIDE
NEW WITH WARRANTYCapable of resawing large timbers with precise results. With its powerful 30HP variable speed saw motor and variable speed hydraulic feed system the HR400PB can be optimized for any job. Equipped with a large cutting capacity up to 15 ¾” wide and up to 9.8” thick. The saw assembly is raised and lowered electronically using a digital input controller for precise thi...
-500x500.jpg)
AMXmachine1
PARTE: 3AM-GS-50/60 - SIERRA CINTA PARA METAL - H-BEAM TUBO DE ACERO
PARTE: 3AM-GS-50/60 - SIERRA CINTA PARA METAL - H-BEAM TUBO DE ACEROSaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherBlade Tension: ManualVice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMax. Cutting Capacity(mm): Round:300mm, sqaure:220*350MMMain Motor(kw): 4Coolant Motor (kw): 0.75Hy...
AMXmachine1
SANDER 37" - WIDE BELT - 1 BAND
PARTE: 2SS-WBS3760101 - SANDER 37" - WIDE BELT - 1 BANDOur American Made Wide Belt Sander will improve your finishing time, decrease your hand sanding and increase your productivity. Available with either a 10 horsepower, single phase or a 15 horsepower, three phase motor these American made wide belt sanders are workhorses that will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt15 Hp, 3 Phase (3~) 208 Volt / 230 Volt460 Volt, 3 Phase (3~), 15 HpWide Belt Sanders solve ...
AMXmachine1
PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
PART:
2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
NEW
WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The t...