ID: 2703
Open
.PNG)
Description
PARTE: 2PI-MMTX - 6-Axis Miter, Mortise, Tenon Machine Center
Is a dual carriage, 6 axis CNC controlled Miter Mortise and Tenon Machining Center – tailored specifically to meet high-volume
production requirements.
- Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.
- Climb cut of both tenon and mortise cuts for a tear out free cut.
- The ability to cut MDF paper or vinyl wrapped profiles.
- Eliminates the need for applying inlays.
- Reduces the maintenance and cost associated with the tooling by more than 50% by eliminating end coping.
- Eliminates the need for outside profiling or sanding the edges of doors
- Eliminates the need for sanding the face of the doorsBoth stiles and rails are run face down for consistency of machining.
- Self aligning joints
- There is a more durable and aesthetically pleasing blind joint (no visible joint on edge of board)
- Multiple tool paths to choose from in tenon and miter (on the mortise side) to accommodate all profiles.
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
Servo-Assisted Case Clamp
PARTE: 2PI-BOA-S - Servo-Assisted Case ClampIs a servo-assisted manually operated Case Clamp designed to clamp cabinet boxes, drawer boxes and case goods that have been doweled together.Easy-to-use Servo-Assisted Manual OperationFastest way to adjust between clamping smaller and larger box sizesHeavy Frame Construction
-500x500.png)
AMXmachine1
TORNO 20'' x 40''
TORNO 20'' x 40'' PARTE: 2GM-GML-2060Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HPISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore 3-1/8”Spindle D1-8Guideway width 12”Main motor 10HP16 spindle speeds from 25-1,800 rpm, 12 speeds4-way rapid traverse on the carriage longitudinal and cross60 kinds of inch threads, and 41 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced...
-500x500.png)
AMXmachine1
COLECTOR DE POLVOS - 5HP
COLECTOR DE POLVOS - 5HP - 2CK-UFO103BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop. HP generating 2863 CFMBase is mounted on casters s...
-500x500.png)
AMXmachine1
Horizontal Bore & Dowel Insertion Machine
PARTE: 2PI-OTF - Horizontal Bore & Dowel Insertion MachineIt is designed to belt position the workpiece, bore a hole, then advance the workpiece to the correct location for the inserter, inject glue or water (for pre glued dowels), and fire the dowel into the hole. A part is placed into the work zone referencing the back fence and advancing the part onto the belt. The belt system allows constant part feeding into the machine.Elimination of complicated machine setupQuick, accurate assemblyGain p...