ID: 2656
Open
Listing ID: #2656 has been added to your wishlist.
.PNG)
Description
PARTE: 2MK-CBC/2.MR -EDGEBANDER
| Technical Information | |
|---|---|
| Eletrical specs | 1 Phase 110V 1500W 60Hz |
| Dual Motor Specs | 24 V 10 AMPS |
| Manual Feeding speed | 0-26 FT/MIN |
| Max Edgebanding Height | 3" |
| Edgebanding coil Support Diameter | 19 1/2" |
| Edgebanding thickness | 0.4 - 2 MM |
| Edgebanding Material | Melamine /PVC/ABS/PP/ VEENER non-fleeced |
| Glue Pot Capacity | 1.5 Lbs |
| Recommend Glue Temperature Range | 130 - 180°C |
| Glue Pot Tape | Granulated Hot-Melt |
| (Extensions open) Machine dimensions (LxWxH) | (101 3/4") 58" x 43" x 43" |
| Shipping Dimensions (LxWxH) | 47 x 30 x 50 |
| Weight | 330 lbs |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
DUST COLLECTOR - 3 HP
PARTE: 2MK-CY/3.C - DUST COLLECTOR - 3 HPThe Dust Collector was developed for cabinet shops with high production. Collects dust of up to 3 machines simultaneously. A light weight and easily transportable machine.Technical InformationMotor Spec1 Phase 220V 3HP 15AAirflow Capacity1941 CFMSound Rating80dbFan Diameter14' / 356 mmNumber Inlet3"Inlet Size4"Filtration1- micronCartridge Filtration size13" x 31"Cartridge Bag Size14.5" x 29.5"Drum Size31 GalDrum Bag Size20" x 43"Machine Dimensions45" x 2...
AMXmachine1
SANDER 43" - WIDE BELT - 1 BAND
PARTE: 2SS- WBS4375101 - SANDER 43" - WIDE BELT - 1 BANDOffering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt 460 Volt, 3 Phase (3~), 20 HpThe 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increa...
-500x500.png)
AMXmachine1
Horizontal Bore, Dowel, and Panel Grooves
PARTE; 2PI-HPMT - Horizontal Bore, Dowel, and Panel GroovesHas a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.Elimination of complicated machine setupProvide a stronger productEasy assembly by providing self aligning joints
-500x500.png)
AMXmachine1
23 Spindle Single Row Line Drill
PARTE: 2RI-R19F - 23 Spindle Single Row Line DrillDescription:Is the mid level model in the line boring drills that Ritter Machinery has to offer. Is both affordable and built to last. Is a multi-spindle drill used for adjustable shelving. No more using templates that wear out quickly and lose accuracy. Is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with indexing pins on both the left and right hand side of the machine. The rear ...