ID: 2638
Open
Listing ID: #2638 has been added to your wishlist.
.PNG)
Description
PARTE: 2MK-LD.300 - SLITTER SANDER - 1HP
Is ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. The precision ground cast iron table adjusts for bevel sanding up to 45-degrees and the 1 HP totally enclosed fan cooled direct drive motor spins at 1,700 RPM, which is ideal for wood sanding applications.
Miter Gauge
This sander includes a deluxe miter gauge for moving workpieces into the sanding disc at a specific angle. To use the miter gauge simply slide it into the miter slot, loosen the lock knob, set the angle, then re-tighten the knob.
Degree Scale
The easy-to-read degree scale lets you know your exact sanding angle for precision and accuracy
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
PART: 12591 – SHREDDER – WOOD – PAPER - 100 HP – VERTICAL – VECOPLAN
PART: 12591 – SHREDDER – WOOD – PAPER - 100 HP – VERTICAL – VECOPLANUSED – VERY GOOD CONDITIONModel: VAZ 1300 SHopper Opening: 52" x 50"Hopper Volume: 3.25 Cubic YardsRotor Diameter: 15"Number of Cutters: 37/60 (40x40)Rotor Speed: 120-145 RPMHP: 100Electrical: 460/3/60Manufactured: 2013
AMXmachine1
PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
PART:
2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
NEW
WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The t...
AMXmachine1
VERTICAL PANEL SAW - 64" HEIGHT X 120" WIDE
PARTE: 2SS-7000 - VERTICAL PANEL SAW - 64" HEIGHT X 120" WIDEHeavy duty induction motors allow for cutting all day with an option of single or three phase power. All of our machines are built to last; gives you that extra motor efficiency with little to no maintenance required. Longevity is made possible by high induction motors supported by US precision machined components.The Panel Saw cuts horizontally and vertically, within .015” straight and square, and has a maximum panel thickness of...
-500x500.png)
AMXmachine1
DUST COLLECTOR - 5 HP
PARTE: 2MK-CPD/5.S - DUST COLLECTOR - 5 HPIs ideal for cabinet shops with high production. With a 200 liters (53 Gallons) tank capacity, you can attach carbon steel or bag, both tanks are easy to be replaced. It has 5 entries with 100 mm (4 inches) and a 5 hp motor. The entry system can be changed according to the needs of its owner.Technical InformationMotor specs5 HP 3 phases 220V 20 AAir Flow Capacity2760 CFMBag volume400 L (14.13 ft³)Number of air inlet:5 (4in)Filtration2.5 micronBag size2...