Identificador: 2638
Abierta
.PNG)
Descripción
PARTE: 2MK-LD.300 - SLITTER SANDER - 1HP
Is ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. The precision ground cast iron table adjusts for bevel sanding up to 45-degrees and the 1 HP totally enclosed fan cooled direct drive motor spins at 1,700 RPM, which is ideal for wood sanding applications.
Miter Gauge
This sander includes a deluxe miter gauge for moving workpieces into the sanding disc at a specific angle. To use the miter gauge simply slide it into the miter slot, loosen the lock knob, set the angle, then re-tighten the knob.
Degree Scale
The easy-to-read degree scale lets you know your exact sanding angle for precision and accuracy
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.png)
AMXmachine1
DOBLADORA DE TUBO HIDRAULICA
DOBLADORA DE TUBO HIDRAULICA PARTE: 2GM-PRB-55H-1PHISO 9001 certified2” schedule 40 pipe is the maximum bending capacity, 2.5” round tube 14 Ga. and 2” square tubeEasy to operate in two positions; vertically and horizontally on its backDRO -Digitally displays your exact position and ensures repeatabilityHeavy Duty 3HP AC main motor1 - Top forming roll (hydraulic driven)2 - Driven bottom rollsRobust, all steel and welded frameworkQuiet, compact, hydraulic system...
-500x500.png)
AMXmachine1
COLECTOR DE POLVOS - 5HP
COLECTOR DE POLVOS - 5HP - 2CK-UFO103BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop. HP generating 2863 CFMBase is mounted on casters s...
-500x500.png)
AMXmachine1
Horizontal Bore, Dowel, and Panel Grooves
PARTE; 2PI-HPMT - Horizontal Bore, Dowel, and Panel GroovesHas a working length of 48”. This machine has a full three axis CNC control. One spindle is used for the mortise work and a separate spindle is used for tenon work. Two working zones are used, allowing for left and right hand programs.Elimination of complicated machine setupProvide a stronger productEasy assembly by providing self aligning joints
-500x500.png)
AMXmachine1
LINE DRILL - 76 SPINDLE CNC DRILLING SYSTEM
PARTE: 2RI-R76 - LINE DRILL - 76 SPINDLE CNC DRILLING SYSTEMDescription:A closet system drill part of the panel master series. Is a CNC single row system drill with programmable drill row location and boring depth. Is used for drilling full length closet panels in a single process. The drill row ball screws and linear rails provide for precision drill row location. The servo driven ball screw table feed control allows for precision drill depth control and through feed boring. The multiple spi...