Identificador: 2572
Abierta
.PNG)
Descripción
TORNO 32 x 80'' PARTE: 2GM-GML-3280
Heavy Duty Precision Gap Bed Lathe 32” x 80” 4-1/8” bore, 15HP Motor.
- ISO 9001 certified
- Large spindle bore 4-1/8”
- 4-way rapid traverse on Longitudinal and cross ways
- All dual inch/metric dials.
- solid cast iron machine base
- Heavy Duty main motor 15 HP
- 12 spindle speeds from 25-1,600 rpm
- 54 kinds of inch threads and metric threads
- Threading and feeding rate change by levers
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Tools box with leveling pads
Max. swing over bed | 32” |
Max. length of workpiece | 80” |
Max. swing over cross slide | 22-7/16” |
Max. Swing in gap | 40-1/2” |
Width of Bed | 16” |
Effective length in gap to spindle | 10” |
Effective length in gap to chuck jaws | 7” |
Spindle bore | 4-1/8” , D1-8 |
Taper of spindle center | MT#5 with1:20 reducing sleeve |
Spindle speeds | 25-1,600 rpm / 12 steps |
Longitudinal feeds | 0.0016-0.055 IPR, 60 kinds |
Cross feeds | 0.0008-0.027 IPR, 60 kinds |
Inch threads | 80-7/16”TPI, 54kinds |
Metric threads | 0.45-120 mm , 54 kinds |
Module threads | 0.25-60 mm, 46 kinds |
Diameter pitch threads | 60-0.25 DP , 42 kinds |
Max. travel of top slide | 9-1/8” |
Max. travel of cross slide | 16-1/2” |
Longitudinal rapid traverse | 18 ft / min. |
Cross rapid traverse | 8 ft / min. |
Diameter of tailstock quill | 3-1/2” |
Max. travel of tailstock quill | 6” |
Taper of tailstock quill center | M.T. # 5 |
Max. weight of workpiece | 2,000 LBS |
4-way tool post size | 1” x 1” |
Longitudinal leadscrew diameter / pitch | Diameter: 3” Pitch: 2 TPI |
Main Motor | 15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V |
Rapid traverse motor | 1/3 HP, 220V/440V, 3 phase, prewired on 220V |
Coolant pump motor | 1/8 HP,220V/440V, 3 phase, prewired on 220V |
Machine weight, approx. | 9,350 LBS |
Overall dimensions, LxWxH | 146” x 48” x 67” |
- Free SINO DRO, installed
- Free Taper turning attachment, , installed
- 12” 3-jaw chuck with top reversible jaws
- 16” 4-jaw chuck
- 20” Face plate
- 10” drive plate
- ¾”-7-1/2” steady rest with roller jaws
- 1”-5” follow rest
- Removable gap
- 4-way tools post
- Chuck guard with safety shut off
- Foot brake
- Halogen Work light
- coolant system
- Full length rear splash
- (2) dead centers and (1) reducing sleeve
- Thread chasing dial
- Tool box and leveling pads
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.png)
AMXmachine1
DOBLADORA DE TUBO HIDRAULICA
DOBLADORA DE TUBO HIDRAULICA PARTE: 2GM-PRB-55H-1PHISO 9001 certified2” schedule 40 pipe is the maximum bending capacity, 2.5” round tube 14 Ga. and 2” square tubeEasy to operate in two positions; vertically and horizontally on its backDRO -Digitally displays your exact position and ensures repeatabilityHeavy Duty 3HP AC main motor1 - Top forming roll (hydraulic driven)2 - Driven bottom rollsRobust, all steel and welded frameworkQuiet, compact, hydraulic system...
AMXmachine1
COLECTOR DE POLVOS - 3HP
COLECTOR DE POLVOS - 3HP - 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.3HP generating 1883 CFMBase is mounted on casters so...
AMXmachine1
COLECTOR DE POLVOS - 5HP
COLECTOR DE POLVOS - 5HP - 2CK-UFO103BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop. HP generating 2863 CFMBase is mounted on casters s...
AMXmachine1
PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
PART:
2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
NEW
WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The t...