ID: 2646
Open
Listing ID: #2646 has been added to your wishlist.
.PNG)
.PNG)
.PNG)
.jpg)
Description
PARTE: 2MK-CBC.MR - EDGEBANDER
Has a built-in retractable extension table providing a work area 3x times longer whenever opened, it is perfect for long pieces such as doors and panels and it has 6 speeds allowing the operator to work as fast as he wants.
WORK AREA
Whenever opened the extension tables will give you 3x the regular work area of the machine.
6 PARAMETERS
With 6 speeds to chose from the feeder switch will work on your desired velocity.
| Technical Information | |
|---|---|
| Electrical specs | 1 Phase 110 V 1500 W 60Hz |
| Motor specs | 24 V 10 Amp |
| Manual Feeding Speed | 0 - 26ft/min |
| Max edgebanding Height | 3" |
| Edgebanding Coil Support Diameter | 19 1/2" |
| Tape Thickness | 0.4 - 2mm |
| Edgebanding Material | Melamine /PVC/ABS/PP/ VEENER non-fleeced |
| Glue Pot Capacity | 1.5 lbs |
| Recommended Glue Temperature Range | 130° to 180º C |
| Glue Pot Tape | Granulated Hot-Melt |
| (Extensions) Machine Dimension LxWxH | (101 3/4") 48 1/2" x 35 1/2" x 43" |
| Shipping Dimension | 43" x 30" x 50" |
| Weight | 240 Lbs. |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachine1
DUST COLLECTOR - 2 HP
PARTE: 2MK-CP/2.C - DUST COLLECTOR - 2 HPIs ideal for collecting light powder from small and medium machines such as saws and sanders. The air flow of this collector is 1,165 ft³/min, resulting in a clean and pleasant environment for your work. The large bag has a capacity of 5.4 sq. feet.Technical InformationMotor Specs1 Phase 220V 2HP 15 Amps 60HzsAir Flow capacity1490 CFMFan Diameter12" | 305mmBag Capacity5ft3Number of air intel2Inlet sizeMain:5" |125mm - Spliter: 4" | 100mmFiltration1 micr...
-500x500.png)
AMXmachine1
Horizontal Bore, Dowel, and Panel Grooves
PARTE: 2PI-HP5D - Horizontal Bore, Dowel, and Panel Grooves Is designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.
Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as c...
AMXmachine1
Hydraulic Heavy Duty Spiral Cutterhead
PARTE: 3CH-HHPB - Hydraulic Heavy Duty Spiral CutterheadHydraulic bore that can be fits in 4-side high speed moulders/planers.Choice of TCT knife bit size 30*12*1.5mm
-500x500.png)
AMXmachine1
CORTADORA MECANICA 8' x 10 Ga
CORTADORA MECANICA 8' x 10 Ga PARTE: 2GM-EPS-0810MISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” long squaring arm with inch / mm scalespring hold-downs high grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 4-edge indexable bottom bladeFull length with full view finger guardFront supports ...