Identificador: 2683
Abierta
.PNG)
Descripción
PARTE: 2RI-R130 - SINGLE SPINDLE HORIZONTAL BORERTechnical Data and Specifications:
Description:
Designed for a dedicated and accurate boring center with single, double or triple spindle boring capability. Stile and rail boring set-up features help eliminate costly mistakes, rejected parts and increase production efficiency. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.
Standard Features:
- Single spindle head
- 7/16-14 Female Threaded Collet
- 0.75 HP Spindle Drive Motor, TEFC
- 0-2" Adjustable Boring Depth
- (4) Material Positioning Stops
- 2" Bore Clamping Cylinder
- Foot Actuated Boring Cycle
- 3450 RPM Spindle Speed
- 6" X 20" Table Area
- Tooling Not Included
Technical Data and Specifications:
- Electrical: 110/120V, 60Hz, 10A
- Air: 2 CFM at 80 – 100 PSI
- Work Height: 40"
- Footprint: 24" x 24"
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine1
ROLADORA DE METAL
ROLADORA DE METALIs a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The roll has three gear-driven rolls that ensure even starting and feeding of materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials. All gears are fully enclosed for safety and protection from the elements. The roll drive is controlled by a toggle-action, shrouded foot switch for instant forward and reverse action. The driv...
-500x500.png)
AMXmachine1
MANUAL EDGEBANDER
PARTE: 2MK-CBC FLEX - MANUAL EDGEBANDERIs perfect to apply edge banding tape to concave and convex curved pieces. Being super portable and weighing only 21 pounds, this machine is ideal for extensive jobs. It has a digital temperature control and adjustable feeder speed.Technical InformationGlueGranulated Hot-MeltGlue Temperature130° to 180º CMotor specs1 Phase 127 V 5.5 A 700 WTape thickness0.4 mm – 1 mmMax. tape width0-35/64” to 1-57/64”Feeder speed0 to 19 ft/minWeight21 Lbs
AMXmachine1
Profile Sander
PARTE: 2PI-220 - LIJADORA DE CANTOSfeatures two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.designed for flexible brushes2 upper and lower sanding headstable moves up and down, allowing the user to sand certa...
-500x500.png)
AMXmachine1
SLITTER SANDER - 1HP
PARTE: 2MK-LD.300 - SLITTER SANDER - 1HPIs ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. The precision ground cast iron table adjusts for bevel sanding up to 45-degrees and the 1 HP totally enclosed fan cooled direct drive motor spins at 1,700 RPM, which is ideal for wood sanding applications.Miter GaugeThis sander includes a deluxe miter gauge for moving workpieces into the sanding disc at a specific angle. To use the miter gauge simply slide i...