Identificador: 2279
Abierta
Descripción
PART: 2SC-2910 - FEED TRACK ASSEMBLY - GANG RIP SAW - SCMI - M3
New with warranty
Guides included
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
AMXmachine
PARTE: 1SL-DC-HQ400-3A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1
PARTE: 1SL-DC-HQ4003A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1NUEVO CON GARANTIADESCRIPCION:- MOTOR 1 HP, 220V, 60 Hz, 2 FASES- HACE ROSCAS MILIMETRICAS Y ESTANDARTORNO:- CAPACIDAD DE VOLTEO: 280 MMDISTANCIA ENTRE PUNTOS: 350 MMDIAMETRO DEL CHUCK: 100 MMVELOCIDADES: 7 VELS (160-1360 RPM)HUSILLO: 19 MMTALADRO:BROQUERO: 1.5 - 13 MMCARRERA DEL HUSILLO: 80 MMCAPACIDAD DE GIRO DE LA CABEZA DEL TALADRO: 90 GRADOSVELOCIDADES: 14 VELS (117-1300 RPM)MEDIDAS TOTALES: 42" LARGO X 23" ANCHO X 35" ALTO...
-500x500.jpg)
AMXmachine
SOLDADORA DE SIERRA CINTAS - 20 – 60 mm
PARTE # 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachine
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETER
PART: 2CA-DM77-E - DOWEL MILLING - 1/4" - 3/4" DIAMETERSelf-feeding and easily changeable cutters.Makes dowels from 6 MIM - 18 MIM (1/4" to ¾”)Dowels stock cut with spiral grooves for gluing.The DM-77 mills wooden dowels from square sticks.Powered by heavy-duty 1 HP motor and produces dowels at the rate of 23 to 27 feet per minute.Specially designed knives make sharpening easy.SPECIFICATIONS:
Diameter
Range: 1/4" ~ 3/4"Motor:
1 HP, 1 PH, 115VWorking
Speed: 24 ~ 28 FPMMinimum
Working Mate...
AMXmachine
PART: 12607 – STRAIGHT LINE RIP SAW – 1 SAW - POWERMATIC
PART: 12607 – STRAIGHT LINE RIP SAW – 1 SAW - POWERMATICUsed – Good conditionManufacturer Specifications - Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge- 12" main blade is supported by heat-treated arbor for rigidity and support- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy- Variable feed speeds accommodate different types of stock- Auto-...