ID: 2291
Open
Description
PART: 12530 - VENEER GUILLOTINE - 2 KNIFE - 4000 MM - EMME ELLE
USED - VERY GOOD CONDITIONS
Model: T.O.2.4000
Capacity 4000 mm
Hydraulic
Frontal Control Panel EC9001
Mfg. 2002
CE Norm
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
PART:
1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE
AND STOPSIDE
ROLLER TABLES Use
with saws, planers, edgebanders, jointers, etc.New
with warranty120
cm (47”) length x 39 cm (15.35”) widthVariable
height 83 - 87 cm (32.5 - 34.25”)Support
large and heavy wood pieces and wood panelsAdjustable
heigh to pair with your current machines7 galvanized steel ball bearing rollers-
1 back guide to avoid material to fall-
1 block stop to make same size ...
-500x500.jpg)
AMXmachine
SOLDADORA DE SIERRA CINTAS
PARTE: 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachine
PART: 10385 – SAWMILL – ELECTRIC - WOODMIZER LT-300
PART: 10385 – SAWMILL – ELECTRIC - WOODMIZER LT-300Used in Good conditionsYear 2001Electric motor: 30 HP, 220/440V, 3 phaseCapacity: 30” diameter x 22 feet longHydraulic rollers to move logs forward and backward to adjust cutsVideo1: https://vimeo.com/606923381Video2: https://vimeo.com/606923689Video3: https://vimeo.com/606924005
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles