Identificador: 2231
Abierta
Descripción
PART: 12512 – DOWEL MACHINE – HAWKER 2000
USED – GOOD CONDITION – AS IS
Complete with knife sharpener
Power hopper feeder
Various sizes feed rollers
Various sizes sleeves
Extra sets of blades
Pago y Devoluciones
- Forma de pago
- Bank Wire Transfer
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.jpg)
AMXmachine
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH - HEAVY DUTY
PART: 1AM-1250 - PALLET NOTCHER - DOUBLE HEAD - 9” LENGTH
- HEAVY DUTYNew with warranty – 6-month warranty on manufacturing
defects on mechanical parts only2 Motors 10 HP, 220/440V, 3 phase - connected to 220V2 On/Off Switch with magnetic startersMaximum notcher size 9” long x 2-1/2” height x 1-5/8” depthEach cutterhead with 4 HSS knives installedSaw dust removal: 12.25” wide x 10.5” tall each opening in the back sideSaw dust removal: 2,300 CFM recommended, equivalent to a 3 HP d...
AMXmachine
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
PART: AMX-10028 - DOBLE MITER SAW 45 DEGREE – 14” DIAMETER - PISTORIUS EMN-14
Used - Very good condition
2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPM
2 New On/Off
Switches with magnetic starters WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guide Left: 37” largo
Gude Right: 22”
largo
Pneumatic pedal
Each cut takes 4 to
6 seconds
Shippi...
AMXmachine
PART: 12565 - DUST COLLECTOR - MOTOR 10 HP - BELFAB
PART: 12565 - DUST
COLLECTOR - MOTOR 10 HP - BELFABUSED - VERY GOOD
CONDITIONMain Motor: 10 HP, 230/460v, 3phStart/Stop
Station for 230v, 3phChip Collect in
Two Lower Plastic Bags
Filtration Surface - sq.ft - 331.63
AMXmachine
PART: 12572 - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN
PART: 12572-E - PRESS GLUING MACHINE - RADIO FRECUENCY -
SOLID WOOD - OGDEN
USED - GOOD CONDITION
Curing area: 36” x 60” x 2” thickClamping pressure is applied by multi-power - dual pistons on
a common shaft - pneumatic cylinders to maximize pressure while relying on
standard plant pressures. Unlike presses without multi-power cylinders, which
require booster compressors, the Model SL36x60 reaches full capacity at 100-psi
plant air pressure.Edge pressure is applied by eight push...