ID: 2272
Open
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
PART: 12473 - KITCHEN CABINET - COUNTERTOP MANUFACTURING LINE - EVANS
USED - GOOD CONDITION
INDEX TABLE
PINCH ROLLER
POSTFORMER
COVING BACKSPLASH
POSTFORMER 0110
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 12532 - CROSS FEED SPLICER - KUPER
PART: 12532 - CROSS FEED SPLICER - KUPER
USED - VERY GOOD CONDITIONModel: ACR Superquick 3200Max. operating width in grain direction approx. 3200 mm Min. operating width in grain direction approx. 600 mm Width of the veneer strips across the grain from approx. 60 mm Veneer thickness approx. 0.3 – 2.5 mm Capacity up to 28 joints/min. Feed speed approx. 30 m/min.
Operating voltage 480 V, 3 Ph, 60 cycles
AMXmachine
PART: 12548 - BALER - COMPACTOR - VERTICAL - 30” X 60” - CARDBOARD CARTON - 67” OPEN HEIGHT
PART: 12548 -
BALER - COMPACTOR - VERTICAL - 30” X 60” - CARDBOARD CARTON - 67” OPEN HEIGHT10 HP MOTOR
USED - GOOD CONDITIONS
AMXmachine
PARTE: 1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASE
PARTE:
1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASENUEVO CON GARANTIAMOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 360 - 3060 RPMCHUCK: 1.5 A 13 MM (5/8")DISTANCIA DEL CHUCK A COLUMNA: 150 MMCARRERA CHUCK: 65 MMDISTANCIA DEL CHUCK A LA MESA: 355 MMDISTANCIA DEL CHUCK A LA BASE: 495 MMDIMENSIONES DE LA MESA: CIRCULAR DE 255 MMDIMENSIONES TOTALES: 920 MM X 255 MM X 540 MMPESO: 38 KGSEMPAQUE: 1 CAJA
AMXmachine
SOLDADORA DE SIERRA CINTAS - 10 – 40 mm
PARTE # 4VF-VC4 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 10 – 40 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm