ID: 2273
Open
Description
PART: 12420 - DIMTER OPTICUT 260 THROUGH FEED OPTIMIZING LINE
USED - VERY GOOD CONDITIONS
Year of Manufacture: 2018
Condition: Excellent
Electric: 460 Voltage 60 Cycle 3 Phase
GREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE
Working dimensions:
Cross section
min./max 0.48"- 10.23" width; .25" - 3.15" thickness.
Min. part length 5.5" cut.
Length min/max 15.75"- 16'0".
Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.
Saw: Blade dia. 20": auto waste gate for waste: Length measurement by flourscent camera.
Software: OptiCom Pro controller with 15" screen: Optimization of (3) grades.
Infeed/Outfeed: 16' Infeed with (2) marking stations; 33' outfeed with 5 kickers for length sort.
Note: Machine has been dismantled and packaged by Dimter tech.
Seller indicates less than 1000 hours on the machine.
Machine available to ship immediately!
Weight: 8000 lbs
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
PART:
1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on
mechanical parts onlyEach notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400
lb.
AMXmachine
PART: 2CK-M412-E - PLANER - 4 SIDES - 5 MOTORS
PART: 2CK-M412-E - PLANER - 4 SIDES - 5 MOTORSNew with warrantyOptions:Top Horizontal Helical CutterheadBottom Horizontal Helical CutterheadSide Vertical Helical CutterheadEconomical and compact machine designed for professional woodworkers looking to produce a wide range of mouldings or S4S. With individual motors to each spindle you can comfortably produce a wide range of products including flooring, crown moulding, paneling, door & furniture components, S4S, and more. The electronic digit...
AMXmachine
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachine
PART: 12572 - PRESS GLUING MACHINE - RADIO FRECUENCY - SOLID WOOD - OGDEN
PART: 12572-E - PRESS GLUING MACHINE - RADIO FRECUENCY -
SOLID WOOD - OGDEN
USED - GOOD CONDITION
Curing area: 36” x 60” x 2” thickClamping pressure is applied by multi-power - dual pistons on
a common shaft - pneumatic cylinders to maximize pressure while relying on
standard plant pressures. Unlike presses without multi-power cylinders, which
require booster compressors, the Model SL36x60 reaches full capacity at 100-psi
plant air pressure.Edge pressure is applied by eight push...