Identificador: 2652
Abierta
.PNG)
.PNG)
Descripción
PARTE: 2MK-CPD/5.S - DUST COLLECTOR - 5 HP
Is ideal for cabinet shops with high production. With a 200 liters (53 Gallons) tank capacity, you can attach carbon steel or bag, both tanks are easy to be replaced. It has 5 entries with 100 mm (4 inches) and a 5 hp motor. The entry system can be changed according to the needs of its owner.
| Technical Information | |
|---|---|
| Motor specs | 5 HP 3 phases 220V 20 A |
| Air Flow Capacity | 2760 CFM |
| Bag volume | 400 L (14.13 ft³) |
| Number of air inlet: | 5 (4in) |
| Filtration | 2.5 micron |
| Bag size | 25" x 35" | 580mm x 900mm |
| Weight | 242.5 Lbs. |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar para hacerle una pregunta al vendedor.
-500x500.png)
AMXmachine1
WORK BENCH - 39" X 16.5"
PARTE: 2MK-MA.1000 - WORK BENCH - 39" X 16.5"The table is made of MDF with a work area of 39” x 16.5” and the rigid sheet structure can hold up to 441 Lbs. The convenient built-in drawer is ideal to store small accessories. It also comes with two sockets and 6.5 ft long extension cord, the retractable legs paired with wheels are super handy whenever moving or transporting it to different locations.Technical InformationDimensions39” x 16” x 33”Max. holding capacity441 Lbs.Weight48 Lbs
-500x500.png)
AMXmachine1
CORTADORA DE METAL HIDRAULICA
CORTADORA DE METAL HIDRAULICA PARTE: 2GM-HS-1014MDTaiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downsHigh grade carbon/chrome alloy steel blades and hardened to 62 hrc,2-edge indexable upper blade and 2-edge indexable bottom bladeFull length with full view finger guardFront supports and (2) side g...
AMXmachine1
SANDER 43" - WIDE BELT - 1 BAND
PARTE: 2SS- WBS4375101 - SANDER 43" - WIDE BELT - 1 BANDOffering woodworkers a maximum sanding width 43″, and available in single or three phase power, this American Made Wide Belt Sander will likely outlive you.Main Motor Options10 Hp, Single Phase (1~), 220 Volt 20 Hp, 3 Phase (3~), 208 Volt / 230 Volt 460 Volt, 3 Phase (3~), 20 HpThe 43″ Wide Belt Sander features a 75” belt, providing 25% more abrasive surface than the smaller 60” belt machines. The larger belt translates to increa...
AMXmachine1
DOBLADORA DE METAL
DOBLADORA DE METAL Cleat Benders are manually operated tools that forma uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustments. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Heavy cast iron and fabricated steel construction provides long life and trouble-free operation.
Model
18
24
30
Maximum capacity,
mild steel
20 ga / 1,0
mm...