ID: 2652
Open
.PNG)
.PNG)
Description
PARTE: 2MK-CPD/5.S - DUST COLLECTOR - 5 HP
Is ideal for cabinet shops with high production. With a 200 liters (53 Gallons) tank capacity, you can attach carbon steel or bag, both tanks are easy to be replaced. It has 5 entries with 100 mm (4 inches) and a 5 hp motor. The entry system can be changed according to the needs of its owner.
| Technical Information | |
|---|---|
| Motor specs | 5 HP 3 phases 220V 20 A |
| Air Flow Capacity | 2760 CFM |
| Bag volume | 400 L (14.13 ft³) |
| Number of air inlet: | 5 (4in) |
| Filtration | 2.5 micron |
| Bag size | 25" x 35" | 580mm x 900mm |
| Weight | 242.5 Lbs. |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
Hydraulic Heavy Duty Spiral Cutterhead
PARTE: 3CH-HHPB - Hydraulic Heavy Duty Spiral CutterheadHydraulic bore that can be fits in 4-side high speed moulders/planers.Choice of TCT knife bit size 30*12*1.5mm
AMXmachine1
Profile Sander
PARTE: 2PI-220 - LIJADORA DE CANTOSfeatures two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.designed for flexible brushes2 upper and lower sanding headstable moves up and down, allowing the user to sand certa...
AMXmachine1
PART: 2CK-HR11P - HORIZONTAL BAND RESAW - 1 BAND - 20 HP - 11.8” WIDE
PART: 2CK-HR11P - HORIZONTAL BAND RESAW - 1 BAND
- 20 HP - 11.8” WIDE
NEW WITH WARRANTYCan produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. Equipped with motorized thickness adjustment with digital control for convenient blade height adjustment. The HR11P ...
-500x500.png)
AMXmachine1
Coping Machine
PARTE: 2PI-CMJ -Coping MachineIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. One motor with a belt is a great fit for smaller shops that don’t need to change between multiple profiles.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage moves