ID: 2674
Open
.PNG)
Description
PARTE: 2RI-R450V - DOOR CLAMPING TABLETechnical Data and Specifications:
Is designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assembly. The multiple pneumatic clamps ensure high clamping pressures on the piece.
Standard Features:
- 3' X 6' Vertical Assembly Easel
- 40° Easel Angle
- (4) Universal Clamping Cylinders & Manifold
- Squaring Bar and Fence
- 2" Cylinder Position Grid Pattern
- 3" Bore Clamp Cylinder Housing
- Heavy Duty Steel Frame
- Perforated Steel Table
- 6 port Manifold with 1/4" NPT Regulator/Gage
- Adjustable pressure from 20 to 130 PSI
- Foot Treadle
Technical Data and Specifications:
- Usable Table Area: 71" x 34"
- Work Height: 31"
- Footprint: 74" x 30"
- Electrical: N/A
- Air: 80-100 PSI
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachine1
PART: 12539 - SHREDDER - BLOAPCO - MODELO 3CAXS3036BV - 40 HP
PART: 12539 - SHREDDER - BLOAPCO - MODELO 3CAXS3036BV - 40 HPUSED - GOOD CONDITIONModel 3CAXS3036BV(3) Rotors 36" wide30" x 36" top feed openingBaldor Reliance 40 HP , 3/60/ 230-460 volt, 1775 RPM motorBottom discharge approx. 28" x 28”
AMXmachine1
TABLETOP SCREW POCKET MACHINE -1 DRILL
PARTE: 2SS-SPM101EZ - SCREW POCKET MACHINE -1 DRILLThe screw pocket machine drills a pilot hole while machining a six degree screw pocket with dual routers and an easy action lever. An “EZ” action lever allows operators to pocket as material allows in two movements, without the need for finding a neutral position.Key features of this machine include:Machining a 6° pilot hole and a screw pocket in one “EZ” motion.An “EZ” action lever allowing operators to pocket as quickly as desi...
AMXmachine1
PART: 2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
PART:
2CK- ST152C-E - SINGLE END TENONER - 1 SIDE
NEW
WITH WARRANTYOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The t...
-500x500.png)
AMXmachine1
Servo-Assisted Case Clamp
PARTE: 2PI-BOA-S - Servo-Assisted Case ClampIs a servo-assisted manually operated Case Clamp designed to clamp cabinet boxes, drawer boxes and case goods that have been doweled together.Easy-to-use Servo-Assisted Manual OperationFastest way to adjust between clamping smaller and larger box sizesHeavy Frame Construction