ID: 2613
Open
.jpg)
.jpg)
.jpg)
PART: 12616 – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY – GASOLINE MOTOR
AMXmachine
Description
PART: 12616 – PALLET NOTCHER – 9” LENGHT – 40 INSERT KNIVE CUTTERHEAD - HEAVY DUTY – GASOLINE MOTOR
Used – very good condition – 50 – 100 hour use
Brand: AMX Machinery
Model: 1AM-1180-EG
Gasoline motor 13 HP
Maximum notcher size 9” length x 3” height x 3” depth
400 to 800 notcher/hr. approximate
Cutterhead with insert replaceable tip knives cutters for new and recycled wood installed
Video: https://vimeo.com/1011462445
Payments & Returns
- Payment Methods
- Bank Wire Transfer
Post Message
Sign in to ask the seller a question.
AMXmachine
PART: 1AM-3010-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH
PART:
1AM-3010-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH
SIDE
ROLLER TABLES Use
with saws, planers, edgebanders, jointers, etc.120
cm (47”) length x 39 cm (15.35”) widthVariable
height 83 - 87 cm (32.5 - 34.25”)Support
large and heavy wood pieces and wood panelsAdjustable
heigh to pair with your current machines
7
galvanized steel ball bearing rollersOptional:
- Custom lengths
AMXmachine
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH
PART: 2SP-S-2415 - WOOD SHREDDER - MOTOR 15 HP - INLET HOPPER 24” WIDE X 36” DEPTH NEW WITH WARRANTY24" wide cutterhead block, 24" wide x 36" deep inlet hopper.15 HP motor/gearbox drive, prepared to operate on 208-230 volts 3 phase power with master control panel & emergency stop included.Generates solid material into approximately 3/8" x 1" sizes.A robust fabrication design built for many years of daily, commercial use suitable for all types of soft or hard wood, plywood, MDF, plastic ma...
AMXmachine
PART: 12505 - VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUT
PART: 12505-E - VERTICAL PANEL SAW - HOLZHER
1265 SUPER CUT
USED - GOOD CONDITIONModel: 1265SYear of Manufacture: 2008Condition: Very GoodElectric: 230 Voltage 60 Cycle 3 PhaseHolz Her Vertical Panel SawSpecifications:Main motor 4 HPDepth of cut 2” maxScoring unit with insert knivesSaw head rotates 90 degrees for rip or cross
cuttingManual shifting back gridGauging bar with flip stop for midway fence with scaleBottom roller with manual control for easy movement of
panelsIntegrated dust...
AMXmachine
PARTE: 1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASE
PARTE:
1SL-DC-DP13N - TALADRO DE BANCO - MOTOR 3/4 HP, 110V, 1 FASENUEVO CON GARANTIAMOTOR: 3/4 HP, 110V, 60 Hz, 1 FASE12 VELOCIDADES: 360 - 3060 RPMCHUCK: 1.5 A 13 MM (5/8")DISTANCIA DEL CHUCK A COLUMNA: 150 MMCARRERA CHUCK: 65 MMDISTANCIA DEL CHUCK A LA MESA: 355 MMDISTANCIA DEL CHUCK A LA BASE: 495 MMDIMENSIONES DE LA MESA: CIRCULAR DE 255 MMDIMENSIONES TOTALES: 920 MM X 255 MM X 540 MMPESO: 38 KGSEMPAQUE: 1 CAJA